There are two methods you can use to accomplish this configuration:
The first method is to use Time of the Day (ToD) routing in Cisco CallManager 4.1.2 or later so that the call is routed to a different call handler based on the schedule setup in Cisco CallManager. Refer to Time-of-Day Routing for more information on configuring ToD routing in Cisco CallManager.
The second method is to use Cisco Unity to pass a call handler to another call handler when someone calls after hours. Complete these steps in order to accomplish this:
Create two call handlers. For this example, one is called "staffing day" and the other is called "staffing night". The staffing day call handler is where the call first goes to when it gets passed to Cisco Unity.
Create a schedule called staffing day, and check the boxes that represent a regular working schedule. Save it.
Assign the schedule to staffing day in the Profile section.
Go to the Greeting section in staffing day and change the status to Closed.
Make the greeting blank.
In Send call to, choose Subscriber and specify staffing night.
Save the changes.
This passes the call to the after hours call handler during the after hours time frame. Refer to Call Routing in Cisco Unity for more information.
Hi All, We have a setup with following in the infrastructure. CUCM Cluster : 220.127.116.1100-40 [ one publisher and one subscriber] IM and P : 11.5 one pub and one sub. Single pair of Expressway E and C version 12.5.9 &nb...
I am using CUCM with PSTN/E1.I am able to receive calls (Inbound) but unable to make calls (Outbound), what can I do to resolve it?When I receive calls:May 11 18:47:44.559 GMT: ISDN Se0/1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x69D3Bearer Capability ...
hi dear friends,i want just to give some information and test result about jabber integration with imagicle solution, this is my test result in date 5/13/2021jabber version 14.0.0 on both PC and android, has some bug with imagicle gadgets integration...