The VG224 supports fax machines and modems. When using fax machines, the VG224 supports Cisco fax relay, T.38 fax relay, and fax pass-through. Cisco or T.38 fax relay technologies allow the transfer of faxes across the network with high reliability using less bandwidth than a voice call. All modems can be connected to the VG224 and are transferred over the network using modem pass-through.
The configuration of Media Gateway Control Protocol (MGCP) fax pass-through on Cisco voice gateways is similar to the configuration of MGCP VoIP calls. The configuration is done by means of several commands in addition to a standard VoIP configuration. The same configuration must be present on the originating and terminating gateways.
Hello, I have observed an issue when searching for a user in Jabber. This user has a given name, lets call him Scott, and goes by his preferred name, Ed. When I search in Jabber for Scott, it shows up as Ed in the directory. What I need is to be...
ICNISR4k#show versionCisco IOS XE Software, Version 16.12.03Cisco IOS Software [Gibraltar], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.12.3, RELEASE SOFTWARE (fc5) I can run this command for a 8845 sip phone#show voice register pool 1...
Does anyone have experience with the UCCX Script Editor "Name to User" step? Documentation states it looks up the directory for the user. Which directory is this, CUCM? Does it integrate through RMCM user? Thanks in advance.