. If someone calls you on your deskphone and SNR is configured like your mobile phone is associated with your deskphone, your mobile phone will also be connected after configurable number of seconds. So when you are moving somewhere from your desk and, your call will never me missed
Now let’s talk about it’s configuration, it’s pretty easier to configure, follow me:
1. Create an end user and associate his deskphone at his profile:
2. Configure Remote Destination Profile (RDP):
Go in Device->Device Settings->remote destination Profile
Things to keep in Mind!
1)Make sure your remote destination number ie your Mobile number matches a Route pattern going to your Gateway 2)Make sure the Re-routing CSS has the access to the Route pattern to successfully route the call to your mobile number.
3)Associate the Line number to your Desk phone extension (very IMP)
3. Configure Remote Destination:
Go to Device->Remote Destination
Things to keep in mind
Make sure you check Mobile phone and enable Mobile connect.
Associate it with the Remote destination Profile.
Now let’s have a try calling your deskphone, your mobile will also be connected after configured seconds (4 seconds by default), if you answer your call from the mobile your deskphone can sense it! wohoo!! your deskphone line will lid red as long as you are talking over mobile. okey, now think you have reached near to your desk and now you want to keep talking using your deskphone, so hangup the call from the mobile it will get hold automatically and now resume it from your deskphone .
Hello.In TMS Administrative Tools --> Configuration --> Provisioning Extension Settings, in the section "LDAP Field Mappings for Import of New Users", is it possible to map a tmspe-db field with two ldap fields (or with a mask to choose between two ...
Hello All,I am planning to upgrade ‘UCCX’ software version from ‘11.5 to 11.6.2’, so I would like you to assist me with best recommended method, prerequisites and precautionary steps to be taken before and duration this upgrade so avoid production impact....
Hi,I'm Woon being responsible for IT Infra. There is VC sharing issue which is on C20 connected to BlueJeans in a meeting room.When my laptop connects to C20 via BlueJeans, my laptop shows only the message "No one else is sharing video." SIP con...
Hello,I have problem with date and time on some phones. Most of them displaying the time and date correctly, but some not.All phones are SIP 7821 with this same software version. I have configured NTP server on router and under 'voice register global'.Fac...