. If someone calls you on your deskphone and SNR is configured like your mobile phone is associated with your deskphone, your mobile phone will also be connected after configurable number of seconds. So when you are moving somewhere from your desk and, your call will never me missed
Now let’s talk about it’s configuration, it’s pretty easier to configure, follow me:
1. Create an end user and associate his deskphone at his profile:
2. Configure Remote Destination Profile (RDP):
Go in Device->Device Settings->remote destination Profile
Things to keep in Mind!
1)Make sure your remote destination number ie your Mobile number matches a Route pattern going to your Gateway 2)Make sure the Re-routing CSS has the access to the Route pattern to successfully route the call to your mobile number.
3)Associate the Line number to your Desk phone extension (very IMP)
3. Configure Remote Destination:
Go to Device->Remote Destination
Things to keep in mind
Make sure you check Mobile phone and enable Mobile connect.
Associate it with the Remote destination Profile.
Now let’s have a try calling your deskphone, your mobile will also be connected after configured seconds (4 seconds by default), if you answer your call from the mobile your deskphone can sense it! wohoo!! your deskphone line will lid red as long as you are talking over mobile. okey, now think you have reached near to your desk and now you want to keep talking using your deskphone, so hangup the call from the mobile it will get hold automatically and now resume it from your deskphone .
Hi,I have queries regarding Webex Teams:1.Can we segregate the teams(group) space and one to one space.2.Can we create different folders or directories in Webex Team chat space.3.Can we download Third party applications directly from Webex Teams instead o...
Just wondering if anyone of you had experience to migrate CMBE 8.X to BE6K 11.X. As you know, CMBE shares IP with CUCM and Unity, so I am curious to know how to migrate or restore the Unity Connection. Thanks for any replies.
I have node unreachable showing in RTMT for 2 of my 5 servers.SDL Link OOS generated every 2 mins.Note* There is nothing down and there is full communication between all nodes and phones. I noticed after using the show network ipprefs all command tha...
Fix:Log in to the codec.(you need the IP address, username / password) Go to:Setup > Configuration > Peripherals > (in the “Profile” area, set “Cameras” to 0.Press “Save” on the top right of the screen.Message went away.
Hello,I bought a DX80 with a defective touchscreen and I'm trying to use it with a mouse and/or keyboard, but none of these are working. Is there a way to configure DX80 to use a USB mouse? Software version: ce 9.2.4 4de75bc 2018-02-20 Than...