. If someone calls you on your deskphone and SNR is configured like your mobile phone is associated with your deskphone, your mobile phone will also be connected after configurable number of seconds. So when you are moving somewhere from your desk and, your call will never me missed
Now let’s talk about it’s configuration, it’s pretty easier to configure, follow me:
1. Create an end user and associate his deskphone at his profile:
2. Configure Remote Destination Profile (RDP):
Go in Device->Device Settings->remote destination Profile
Things to keep in Mind!
1)Make sure your remote destination number ie your Mobile number matches a Route pattern going to your Gateway 2)Make sure the Re-routing CSS has the access to the Route pattern to successfully route the call to your mobile number.
3)Associate the Line number to your Desk phone extension (very IMP)
3. Configure Remote Destination:
Go to Device->Remote Destination
Things to keep in mind
Make sure you check Mobile phone and enable Mobile connect.
Associate it with the Remote destination Profile.
Now let’s have a try calling your deskphone, your mobile will also be connected after configured seconds (4 seconds by default), if you answer your call from the mobile your deskphone can sense it! wohoo!! your deskphone line will lid red as long as you are talking over mobile. okey, now think you have reached near to your desk and now you want to keep talking using your deskphone, so hangup the call from the mobile it will get hold automatically and now resume it from your deskphone .
Hi EveryoneI have a group of users who are in a hunt group and they want to have a night service enabled. I asked them would they like to have TOD routing enabled and they said no because some days they leave early and some days they leave late and TOD ro...
I want to display the first name last name of the user using the IP phone in ArabicUseful informations:- phone model: sip phone 7841- arabic is already loaded on phone "menu only"- Software and hardware: version CUCME 12.2 on ISR 433...
Hi I have a query on CUCM 10.5 Licensing. My client wants to remove all Hard phones (Nearly 150) and want to deploy CIPC against each hard phone.Can I configure both types of phones for all the users for time being even if we do not have licenses to ...
Hello Experts,How can we modify the layout of Finesse to show only agents with Ready or Not Ready status. Our Call Center is 24/7 with more than 200 agents working in 3 different shifts. The supervisors don't want to see those agents w...