. If someone calls you on your deskphone and SNR is configured like your mobile phone is associated with your deskphone, your mobile phone will also be connected after configurable number of seconds. So when you are moving somewhere from your desk and, your call will never me missed
Now let’s talk about it’s configuration, it’s pretty easier to configure, follow me:
1. Create an end user and associate his deskphone at his profile:
2. Configure Remote Destination Profile (RDP):
Go in Device->Device Settings->remote destination Profile
Things to keep in Mind!
1)Make sure your remote destination number ie your Mobile number matches a Route pattern going to your Gateway 2)Make sure the Re-routing CSS has the access to the Route pattern to successfully route the call to your mobile number.
3)Associate the Line number to your Desk phone extension (very IMP)
3. Configure Remote Destination:
Go to Device->Remote Destination
Things to keep in mind
Make sure you check Mobile phone and enable Mobile connect.
Associate it with the Remote destination Profile.
Now let’s have a try calling your deskphone, your mobile will also be connected after configured seconds (4 seconds by default), if you answer your call from the mobile your deskphone can sense it! wohoo!! your deskphone line will lid red as long as you are talking over mobile. okey, now think you have reached near to your desk and now you want to keep talking using your deskphone, so hangup the call from the mobile it will get hold automatically and now resume it from your deskphone .
Hi, We are working on an integration with Cisco UCCX (184.108.40.20601-34).We need to get skill aggregated data in 15 minute intervals.The skill data that is needed per interval is: Call volume (handled + abandoned), Handled calls, Average...
Need some Opinions on this. I have a Device on site that is not always manned but it's 'important'. The customer has the following requests: Device rings DN 4444If No Answer and it's during Business hours, send it on to DNs 4000, 4001, 40...
Hi there, We are running a Zoom webinar through three Cisco SX80's across all offices to join our All-Hands meetings. Ideally, we want to share content from one location and have our remote participants share on the left screen and our content share ...
hello everyone, My management requested from to generate report for calls informations like average time , waiting duration and more info per user.When I go to System>traffic the generated report contain minimum info and the value is 0 Where ...
Hello everyone! I'm curious what other people are doing for MOH for multiple locations. Scenario is a need for 45 sites to have unique MOH playing that is specific to the location and allow them to manage their own MOH files to change them week...