cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays

How to configure the MeetingPlace 8100 series with a Siemens HiPath 4000 PBX system

285
Views
0
Helpful
0
Comments

Resolution

When configuring Cisco MeetingPlace 8100 series with a Siemens HiPath 4000 PBX system, you must program the T1 trunks as either Tie type trunks or EMI and Wink, not Wink and Immediate.

If you do not make these changes, there is no Dual Tone Multifrequency (DTMF) to or from Cisco MeetingPlace.

To confirm that DTMF exists both to and from Cisco MeetingPlace, test the outdial by issuing the activity command.

For a more detailed configuration example, refer to MeetingPlace Server Siemens HiPath 4000 Configuration Example.

Content for Community-Ad