4. Assign the IP address (and the rest of the IP configuration) from the NIC Teaming to the primary NIC. Confirm that the 2nd NIC does NOT have a static IP address configured on it and that it is disabled. (Don't bother testing with "ipconfig /all" yet.) 5. Shut down the server. 6. Reconnect the network cables. 7. Boot the server back up. (No CRS services will start up because CRS Node Manager is still set to Manual) 8. Verify NIC binding order is correct. The primary NIC must be listed first in the binding order. If the binding order is not correct it must be fixed and the server will need to be re-booted. 9. Launch C:\Program Files\Cisco\Desktop\bin\PostInstall.exe.
Confirm that the proper IP address appears as "Primary" and click OK.
Wait a few seconds...
"Error connecting to Directory Service..." message pops up. Click "No".
On the "VoIP Network Device" tab, select the correct NIC from the drop-down lis.
(even if the right one appears to be already selected, actually pull down the drop down list and select the correct choice from that list again).
Click Apply, and then shut down the tool
10. Set the CRS Node Manager service to Automatic startup again. 11. Reboot the server one more time.
I connect to cisco IP phone 6921 via SSH and try to press the button remotely ,
I saw that there is a "RTL CLI_PRESS" command that allow me to press the button ,
after I succeeded to press all the button I saw th...
In SRST mode my Jabber Softphone client is correctly registered to my ISR4331. I would like to transfer a call from 2000 to 3000 but the transfer button is grey.
The same transfer is OK with a Cisco 7821.
In SRST in my voice register configuration,...
We are in the planning stage for a new building and looking into to purchasing a VG310 for analog faxing and such but wondering if we can purchase the FXO card VIC2-4FXO to use in the EHWIC slot and connect POTS lines and use for local 911 dialing. Can th...
Hi Experts, Can anyone help me out if Voice Quality (MOS parameters, etc..) related data is collected on CUCM (CMR?) from calls taken on following devices:- Third-Party SIP Device (Advanced) - Cisco Webex Wireless Phones 840 and 860 many th...
I updated my Cisco headset a few days to 1-9-0-88 and now I get a "random" beeping noise. It is almost like it when I am talking the beep occurs but I am not sure if there is any pattern.
Anyone else have any similar issues?