1. Create a dummy DN (need not be associated with any phone) by browsing to Call Routing > Directory Number
2. Create a Line Group (Call Routing > Hunt / Route > Line Group), and assign the dummy DN as a hunt group member. Add other members to the Line Group, as needed. 3. Create a Hunt List (Call Routing > Hunt / Route > Line Group) and associate the Line Group with it 4. Associate this Hunt List with the required Hunt Pilot Number 5. Create Remote Destination Profile (Device > Device Settings > Remote Destination Profile) with its line being the dummy DN 6. Create a Remote Destination (RD) to the cell phone you want the call to be extended to, and associate it with the Remote Destination Profile (RDP) 7. Set the Delay Before Ringing timer on RD to be 0, so that the call to the cell phone is extended immediately when the Dummy DN is called 8. Make sure that you check the 'Enable Mobility' checkbox for the RDP user (User Management > End Users) 9. Make sure that the SNR call to the cell phone will be successful (Rerouting CSS on RDP determines that)
- You can associate the Dummy DN with a partition with a time schedule, so that cell phone rings only during that time, when that hunt pilot is called
I want my cell phone (6145551234) to ring during office hours (9 AM to 5 PM) when hunt pilot 1000 is called. I prefix 9 to dial out from the CallManager network to cell phone numbers.
1. Create a new partition (say, SNR_Time_Pt)
2. Create a Time Schedule from 9 AM to 5 PM, Monday through Friday, and assign that Time Schedule to the partition SNR_Time_Pt
3. Create a unique dummy DN on CallManager (say, 1234) in partition SNR_Time_Pt
4. Assign the dummy DN 1234 as a hunt group member for the required Hunt Pilot number 1000 5. Check the 'Enable Mobility' checkbox for the RDP user to be used 6. Create Remote Destination Profile (RDP) with its line being the dummy DN 1234 in SNR_Time_Pt 7. Create a Remote Destination (RD) for this RDP, and enter the RD to be 96145551234 (as 9 has to be prefixed for outgoing calls, if no application dial rule has been configured) 6. Set the 'Delay Before Ringing' timer on RD to be 0, so that the call to the cell phone 6145551234 is extended immediately when the Dummy DN 1234 is called 7. Configure the Rerouting CSS on the RDP so that the call to the cell phone can be routed successfully
Hi Folks, I have implemented MRA via expressway and apple push notification service for Cisco jabber. It works well however I have few queries: 1) In jabber client on iPhone I can see internal CUCM and Unity connection IP address under phone ser...
New to UCCX scripting, but I wrote and entire medical eligibility UCCX IVR app and I'm stuck on this one thing only.What do you use in the script to execute this webcall. "http://192.168.5.5/logEnter.php?LOG_ID=2222"This is a confirmation number add to th...
OK, I know it is simple and I am just missing it, but here is my scenario: Production CUCM 12.5 with IM&P using DNS SRV RecordsProduction Unity ConnectionJabber 11.6 Lab CUCM 12.5 with LAB IM&P, no DNS (Same Network as production)Test Ja...