Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article
2124
Views
0
Helpful
0
Comments

How to get the configuration file for a Cisco MGCP gateway

pkinane
Cisco Employee
Cisco Employee

‎01-05-2017 08:09 AM - edited ‎03-12-2019 10:25 AM

 

Introduction

This document will explain the bare minimum information for gathering the config file off a Cisco MGCP voice gateway.

 

I will cover three ways to get the file. The first way is the easiest because it takes the least amount of time, the second way is not as good as the first because you need to save a file on the router, the third option is least desirable because it requires changes on the router and a lot of the parameters in the configuration are marked as unknown.

 

If you would like to know how to gather phone configuration file you can reference Two Ways to Obtain a Phone's Configuration File from CUCM.

 

The easiest way

You can also review (or copy then paste to a file) the configuration from a web browser. Follow the steps below to do so.

 

  • Find one of the ports for the gateway using this link:
    • http://<ipofcucm>:6970/ConfigFileCacheList.txt
  • Remove all of the port information and keep only the device name
  • Add the device name to the end of the link below (include the domain if there is one):
    • http://<ipofcucm>:6970/
  • Once you receive a new page with an error, right click and view the source.

 

Example of the easy way

 

 

 

Save the file on router - use if the first method has issues

Get the MGCP name of the router using the command show ccm-manager | i Name then use the command copy tftp flash: to tell the router to download something from the tftp server and save it to flash. When prompted for the IP of the tftp server put in your CUCM tftp server. Then when prompted for the file name provide the router's mgcp name with cnf.xml appended.

 

Example from lab

rtp12-pkinane-SJ#show ccm-manager | i Name
MGCP Domain Name: rtp12-pkinane-SJ.pkinane.lab
rtp12-pkinane-SJ#copy tftp flash:
Address or name of remote host []? 14.48.38.5
Source filename []? rtp12-pkinane-SJ.pkinane.lab.cnf.xml
Destination filename [rtp12-pkinane-SJ.pkinane.lab.cnf.xml]?
Accessing tftp://14.48.38.5/rtp12-pkinane-SJ.pkinane.lab.cnf.xml...
Loading rtp12-pkinane-SJ.pkinane.lab.cnf.xml from 14.48.38.5 (via FastEthernet0/0.1): !
[OK - 7211 bytes]

7211 bytes copied in 0.612 secs (11783 bytes/sec)

rtp12-pkinane-SJ#more flash:rtp12-pkinane-SJ.pkinane.lab.cnf.xml
<mgcp  xsi:type="axl:XMGCP" uuid="{02b76541-7529-4bb3-f81a-930375ed040a}">
<domainName>rtp12-pkinane-SJ.pkinane.lab</domainName>
<description>rtp12-pkinane-SJ</description>
<product>Cisco 2811</product>
<model>Unknown MGCP Gateway</model>
<callManagerGroup>
<name>SJ_CMG</name>
<tftpDefault>true</tftpDefault>
<members>
<member  priority="0">
<callManager>
<name>clstr-1-subA.pkinane.lab</name>
<description>14.48.38.6</description>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>clstr-1-subA.pkinane.lab</processNodeName>
</callManager>
</member>
<member  priority="1">
<callManager>
<name>clstr-1-subB.pkinane.lab</name>
<description>14.48.38.7</description>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>clstr-1-subB.pkinane.lab</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<units>
<unit  index="0">
<product>NM-4VWIC-MBRD</product>
<subunits>
<subunit  index="2">
<product>VWIC-1MFT-T1</product>
<endpoints>
<endpoint  index="0">
<device  ctiid="15" uuid="{353bb8cc-c7da-2a98-3cb8-33e56a8e3cd8}" xsi:type="axl:XPRIGateway">
<name>S0/SU2/DS1-0@rtp12-pkinane-SJ.pkinane.lab</name>

<description>S0/SU2/DS1-0@rtp12-pkinane-SJ</description>
<product>Cisco MGCP T1 Port</product>
<model>MGCP Trunk</model>
<class>Gateway</class>
<protocol>Digital Access PRI</protocol>
<protocolSide>User</protocolSide>
<callingSearchSpace  uuid="{72b981d4-a094-4b99-272c-6598cbb21ddf}">
<name>INTERNAL_CSS</name>
<description></description>
<clause>E911_PT:Phones_PT:EMERGENCY_PT:INTERNAL_PT:INFORMACAST_PT</clause>
<dialPlanWizardGenID>0</dialPlanWizardGenID>
<members>
<member  index="1">
<routePartition  uuid="{0f3e30ca-fd91-00d5-f467-e08147a0d7d7}">
<name>E911_PT</name>
<description>E911_PT</description>
<dialPlanWizardGenId>0</dialPlanWizardGenId>
</routePartition>
</member>
<member  index="2">
<routePartition  uuid="{368d375c-83e8-cce9-5f56-1aef7b15b1ae}">
<name>Phones_PT</name>
<description>Phones_PT</description>
<dialPlanWizardGenId>0</dialPlanWizardGenId>
</routePartition>
</member>
<member  index="3">
<routePartition  uuid="{3130a713-70ee-3980-37c0-4276e77c8808}">
<name>EMERGENCY_PT</name>
<description>EMERGENCY_PT</description>
<dialPlanWizardGenId>0</dialPlanWizardGenId>
</routePartition>
</member>
<member  index="4">
<routePartition  uuid="{282fc8eb-9bb8-7dd1-193c-e7f15b5e42e6}">
<name>INTERNAL_PT</name>
<description>All internal numbers</description>
<dialPlanWizardGenId>0</dialPlanWizardGenId>
</routePartition>
</member>
<member  index="5">
<routePartition  uuid="{6689d794-4e65-70a6-3686-ffa1222622be}">
<name>INFORMACAST_PT</name>
<description>INFORMACAST_PT</description>
<dialPlanWizardGenId>0</dialPlanWizardGenId>
</routePartition>
</member>
</members>
</callingSearchSpace>
<devicePool  uuid="{04330028-1071-fdbf-3add-8ac67db81b81}">
<revertPriority>0</revertPriority>
<name>SJ_DP</name>

<dateTimeSetting  uuid="{9ec4850a-7748-11d3-bdf0-00108302ead1}">
<name>CMLocal</name>
<dateTemplate>M/D/Y</dateTemplate>
<timeZone></timeZone>
<olsonTimeZone>EST5EDT</olsonTimeZone>
<ntps>
<ntp>
<name>172.18.108.14</name>
<ntpMode>Directed Broadcast</ntpMode>
</ntp>
<ntp>
<name>172.18.108.15</name>
<ntpMode>Directed Broadcast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<name>SJ_CMG</name>
<tftpDefault>true</tftpDefault>
<members>
<member  priority="0">
<callManager>
<name>clstr-1-subA.pkinane.lab</name>
<description>14.48.38.6</description>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>clstr-1-subA.pkinane.lab</processNodeName>
</callManager>
</member>
<member  priority="1">
<callManager>
<name>clstr-1-subB.pkinane.lab</name>
<description>14.48.38.7</description>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>clstr-1-subB.pkinane.lab</processNodeName>
</callManager>
</member>

</members>
</callManagerGroup>
<srstInfo  uuid="{d7710a10-c962-2c57-3214-dd161c146d70}">
<name>14.48.38.250</name>
<srstOption>User Specific</srstOption>
<userModifiable>true</userModifiable>
<ipAddr1>14.48.38.250</ipAddr1>
<port1>2000</port1>
<ipAddr2></ipAddr2>
<port2>2000</port2>
<ipAddr3></ipAddr3>
<port3>2000</port3>
<sipIpAddr1>14.48.38.250</sipIpAddr1>
<sipPort1>5060</sipPort1>
<sipIpAddr2></sipIpAddr2>
<sipPort2>5060</sipPort2>
<sipIpAddr3></sipIpAddr3>
<sipPort3>5060</sipPort3>
<isSecure>false</isSecure>
</srstInfo>
<connectionMonitorDuration>120</connectionMonitorDuration>
</devicePool>
<networkHoldMOHAudioSourceId>0</networkHoldMOHAudioSourceId>
<userHoldMOHAudioSourceId>0</userHoldMOHAudioSourceId>
<loadInformation></loadInformation>
<vendorConfig>
<lineCoding>B8ZS</lineCoding><framing>ESF</framing><clock>External</clock><InputGain>0</InputGain><OutputAttenuation>0</OutputAttenuation><EchoCancelationEnable>Enable</EchoCancelationEnable><EchoCancelationCoverage>128</EchoCancelationCoverage></vendorConfig>
<versionStamp>1481221553-ae1f65d3-95eb-4f4a-8dce-23e9f65197a2</versionStamp>
<mlppDomainId>000000</mlppDomainId>
<mlppIndicationStatus>Off</mlppIndicationStatus>
<preemption>Default</preemption>
<retryVideoCallAsAudio>true</retryVideoCallAsAudio>
<networkLocale>United_States</networkLocale>
<callerIDDN></callerIDDN>
<callingPartySelection>Originator</callingPartySelection>
<dChannelEnable>true</dChannelEnable>
<encode>u-law</encode>
<priProtocol>PRI NI2</priProtocol>
<trunkSelectionOrder>Top Down</trunkSelectionOrder>
<displayIE>false</displayIE>
<helpURL></helpURL>
</device>
</endpoint>
</endpoints>
</subunit>
</subunits>
</unit>
</units>
<vendorConfig>
<globalISDNSwitchType>NI2</globalISDNSwitchType><switchBack>Graceful</switchBack><switchBackDelay>10</switchBackDelay><switchBackSchedule>12:00</switchBackSchedule><DtmfRelay>NoChange</DtmfRelay><ModemPassthrough>Enable</ModemPassthrough><CiscoFaxRelay>Disable</CiscoFaxRelay><T38FaxRelay>Disable</T38FaxRelay><rtpPackageCapability>Enable</rtpPackageCapability><mtPackageCapability>Disable</mtPackageCapability><resPackageCapability>Disable</resPackageCapability><prePackageCapability>Enable</prePackageCapability><sstPackageCapability>Enable</sstPackageCapability><rtpUnreachableOnOff>Enable</rtpUnreachableOnOff><rtpUnreachableTimeout>1000</rtpUnreachableTimeout><rtcpReportInterval>0</rtcpReportInterval><simpleSdpEnable>Enable</simpleSdpEnable></vendorConfig>

<versionStamp>1481221553-81e7329b-ef64-427e-b3db-0ce6b436ead4</versionStamp>
<loadInformation></loadInformation>
</mgcp

Enable logging of the config file - least desirable

The router first needs to have a logging buffer enabled, we want to prevent other debugs from printing to the log in the middle of the configuration file, and we want to enable the single debug for printing the configuration file to the logging buffer. This is done with the commands below. All The commands in this document are entered in global configuration mode. To enter global configuration mode use the command conf t.

service sequence-numbers

service timestamps debug datetime localtime msec

logging buffered 10000000

no logging console

no logging monitor

default logging rate-limit

default logging queue-limit

do u all

do debug ccm-manager config-download xml

 

 

For more information on logging you can reference How to configure logging in Cisco IOS.

 

Force the router to request the configuration

Enter the commands below to force the configuration download.

no ccm-manager config
do clear log
ccm-manager config

 

Gather the configuration file from the logging buffer

Now the configuration file can be gathered from the logging buffer with the command do show log.

 

Once you have the configuration file you can use the command do u all to disable the debug.

 

Example from my lab

rtp12-pkinane-SJ#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#service sequence-numbers
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#service timestamps debug datetime localtime msec
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#logging buffered 10000000
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#no logging console
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#no logging monitor
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#default logging rate-limit
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#default logging queue-limit
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#do u all
All possible debugging has been turned off
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#do debug ccm-manager config-download xml
Call Manager config XML debugging is on
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#no ccm-manager config
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#do clear log
Clear logging buffer [confirm]
rtp12-pkinane-SJ(config)#ccm-manager config
rtp12-pkinane-SJ(config)#
rtp12-pkinane-SJ(config)#do show log
Syslog logging: enabled (0 messages dropped, 115 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.



No Inactive Message Discriminator.


    Console logging: disabled
    Monitor logging: disabled
    Buffer logging:  level debugging, 164 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level informational, 951 message lines logged
        Logging Source-Interface:       VRF Name:

Log Buffer (10000000 bytes):

001249: Jan  5 11:23:18.342: cmapp_prefix_process_tag_mgcp:
001250: Jan  5 11:23:18.346: cmapp_parse_xml: Unknown tag <domainName>
001251: Jan  5 11:23:18.346: cmapp_parse_xml: Unknown tag <description>
001252: Jan  5 11:23:18.346: cmapp_process_tag_product:
001253: Jan  5 11:23:18.346: cmapp_process_tag_product: prev_tag = [<mgcp>] contents= [Cisco 2811]
001254: Jan  5 11:23:18.346: cmapp_parse_xml: Unknown tag <model>
001255: Jan  5 11:23:18.346: cmapp_prefix_process_tag_cm_group:
001256: Jan  5 11:23:18.346: cmapp_process_tag_name:
001257: Jan  5 11:23:18.346: cmapp_parse_xml: Unknown tag <tftpDefault>
001258: Jan  5 11:23:18.350: cmapp_prefix_process_tag_cm_group_members:
001259: Jan  5 11:23:18.350: cmapp_prefix_process_tag_cm_group_member:
001260: Jan  5 11:23:18.350: cmapp_prefix_process_tag_cm_group_member: attr=[0]
001261: Jan  5 11:23:18.350: cmapp_prefix_process_tag_cm:
001262: Jan  5 11:23:18.350: cmapp_process_tag_name:
001263: Jan  5 11:23:18.350: cmapp_parse_xml: Unknown tag <description>
001264: Jan  5 11:23:18.350: cmapp_prefix_process_tag_ports:
001265: Jan  5 11:23:18.350: cmapp_parse_xml: Unknown tag <ethernetPhonePort>
001266: Jan  5 11:23:18.354: cmapp_parse_xml: Unknown tag <sipPort>
001267: Jan  5 11:23:18.354: cmapp_parse_xml: Unknown tag <securedSipPort>
001268: Jan  5 11:23:18.354: cmapp_prefix_process_tag_mgcp_ports:
001269: Jan  5 11:23:18.354: cmapp_process_tag_listen:
001270: Jan  5 11:23:18.354: cmapp_process_tag_listen: MGCP port = 2427
001271: Jan  5 11:23:18.354: cmapp_process_tag_keepalive:
001272: Jan  5 11:23:18.354: cmapp_process_tag_keepalive: TCP port = 2428
001273: Jan  5 11:23:18.354: cmapp_process_tag_node_name:
001274: Jan  5 11:23:18.354: cmapp_process_tag_node_name: Pri CM name is clstr-1-subA.pkinane.lab
001275: Jan  5 11:23:18.358: cmapp_prefix_process_tag_cm_group_member:
001276: Jan  5 11:23:18.358: cmapp_prefix_process_tag_cm_group_member: attr=[1]
001277: Jan  5 11:23:18.358: cmapp_prefix_process_tag_cm:
001278: Jan  5 11:23:18.358: cmapp_process_tag_name:
001279: Jan  5 11:23:18.358: cmapp_parse_xml: Unknown tag <description>
001280: Jan  5 11:23:18.358: cmapp_prefix_process_tag_ports:
001281: Jan  5 11:23:18.358: cmapp_parse_xml: Unknown tag <ethernetPhonePort>
001282: Jan  5 11:23:18.358: cmapp_parse_xml: Unknown tag <sipPort>
001283: Jan  5 11:23:18.362: cmapp_parse_xml: Unknown tag <securedSipPort>
001284: Jan  5 11:23:18.362: cmapp_prefix_process_tag_mgcp_ports:
001285: Jan  5 11:23:18.362: cmapp_process_tag_listen:
001286: Jan  5 11:23:18.362: cmapp_process_tag_keepalive:
001287: Jan  5 11:23:18.362: cmapp_process_tag_node_name:
001288: Jan  5 11:23:18.362: cmapp_process_tag_node_name: 1st backup CM name is clstr-1-subB.pkinane.lab
001289: Jan  5 11:23:18.366: cmapp_prefix_process_tag_units:
001290: Jan  5 11:23:18.366: cmapp_prefix_process_tag_unit:
001291: Jan  5 11:23:18.366: cmapp_process_tag_product:
001292: Jan  5 11:23:18.366: cmapp_process_tag_product: prev_tag = [<unit>] contents= [NM-4VWIC-MBRD]
001293: Jan  5 11:23:18.366: cmapp_process_tag_product: product = NM-4VWIC-MBRD
001294: Jan  5 11:23:18.366: cmapp_prefix_process_tag_subunits:
001295: Jan  5 11:23:18.366: cmapp_prefix_process_tag_subunit:
001296: Jan  5 11:23:18.370: cmapp_process_tag_product:
001297: Jan  5 11:23:18.370: cmapp_process_tag_product: prev_tag = [<subunit>] contents= [VWIC-1MFT-T1]
001298: Jan  5 11:23:18.370: cmapp_prefix_process_tag_endpoints:
001299: Jan  5 11:23:18.370: cmapp_prefix_process_tag_endpoint:
001300: Jan  5 11:23:18.370: cmapp_prefix_process_tag_device:
001301: Jan  5 11:23:18.370: cmapp_prefix_process_tag_device: attr=[axl:XPRIGateway]
001302: Jan  5 11:23:18.370: cmapp_process_tag_name:
001303: Jan  5 11:23:18.374: cmapp_parse_xml: Unknown tag <description>
001304: Jan  5 11:23:18.374: cmapp_process_tag_product:
001305: Jan  5 11:23:18.374: cmapp_process_tag_product: prev_tag = [<device>] contents= [Cisco MGCP T1 Port]
001306: Jan  5 11:23:18.374: cmapp_process_tag_product: port is T1
001307: Jan  5 11:23:18.374: cmapp_parse_xml: Unknown tag <model>
001308: Jan  5 11:23:18.374: cmapp_parse_xml: Unknown tag <class>
001309: Jan  5 11:23:18.374: cmapp_process_tag_side:
001310: Jan  5 11:23:18.374: cmapp_process_tag_side -  protocol_side:User
001311: Jan  5 11:23:18.378: cmapp_parse_xml: Unknown tag <callingSearchSpace>
001312: Jan  5 11:23:18.378: cmapp_prefix_process_tag_device_pool:
001313: Jan  5 11:23:18.378: cmapp_parse_xml: Unknown tag <revertPriority>
001314: Jan  5 11:23:18.378: cmapp_process_tag_name:
001315: Jan  5 11:23:18.378: cmapp_parse_xml: Unknown tag <dateTimeSetting>
001316: Jan  5 11:23:18.378: cmapp_prefix_process_tag_cm_group:
001317: Jan  5 11:23:18.382: cmapp_process_tag_name:
001318: Jan  5 11:23:18.382: cmapp_parse_xml: Unknown tag <tftpDefault>
001319: Jan  5 11:23:18.382: cmapp_prefix_process_tag_cm_group_members:
001320: Jan  5 11:23:18.382: cmapp_prefix_process_tag_cm_group_member:
001321: Jan  5 11:23:18.382: cmapp_prefix_process_tag_cm:
001322: Jan  5 11:23:18.382: cmapp_process_tag_name:
001323: Jan  5 11:23:18.382: cmapp_parse_xml: Unknown tag <description>
001324: Jan  5 11:23:18.382: cmapp_prefix_process_tag_ports:
001325: Jan  5 11:23:18.386: cmapp_parse_xml: Unknown tag <ethernetPhonePort>
001326: Jan  5 11:23:18.386: cmapp_parse_xml: Unknown tag <sipPort>
001327: Jan  5 11:23:18.386: cmapp_parse_xml: Unknown tag <securedSipPort>
001328: Jan  5 11:23:18.386: cmapp_prefix_process_tag_mgcp_ports:
001329: Jan  5 11:23:18.386: cmapp_process_tag_listen:
001330: Jan  5 11:23:18.386: cmapp_process_tag_keepalive:
001331: Jan  5 11:23:18.386: cmapp_process_tag_node_name:
001332: Jan  5 11:23:18.390: cmapp_prefix_process_tag_cm_group_member:
001333: Jan  5 11:23:18.390: cmapp_prefix_process_tag_cm:
001334: Jan  5 11:23:18.390: cmapp_process_tag_name:
001335: Jan  5 11:23:18.390: cmapp_parse_xml: Unknown tag <description>
001336: Jan  5 11:23:18.390: cmapp_prefix_process_tag_ports:
001337: Jan  5 11:23:18.390: cmapp_parse_xml: Unknown tag <ethernetPhonePort>
001338: Jan  5 11:23:18.390: cmapp_parse_xml: Unknown tag <sipPort>
001339: Jan  5 11:23:18.394: cmapp_parse_xml: Unknown tag <securedSipPort>
001340: Jan  5 11:23:18.394: cmapp_prefix_process_tag_mgcp_ports:
001341: Jan  5 11:23:18.394: cmapp_process_tag_listen:
001342: Jan  5 11:23:18.394: cmapp_process_tag_keepalive:
001343: Jan  5 11:23:18.394: cmapp_process_tag_node_name:
001344: Jan  5 11:23:18.394: cmapp_parse_xml: Unknown tag <srstInfo>
001345: Jan  5 11:23:18.398: cmapp_parse_xml: Unknown tag <connectionMonitorDuration>
001346: Jan  5 11:23:18.398: cmapp_parse_xml: Unknown tag <networkHoldMOHAudioSourceId>
001347: Jan  5 11:23:18.398: cmapp_parse_xml: Unknown tag <userHoldMOHAudioSourceId>
001348: Jan  5 11:23:18.398: cmapp_parse_xml: Unknown tag <loadInformation>
001349: Jan  5 11:23:18.398: cmapp_prefix_process_tag_vendor_config:
001350: Jan  5 11:23:18.402: cmapp_process_tag_lcode:
001351: Jan  5 11:23:18.402: cmapp_process_tag_framing:
001352: Jan  5 11:23:18.402: cmapp_process_tag_clock:
001353: Jan  5 11:23:18.402: cmapp_process_tag_inputGain:
001354: Jan  5 11:23:18.402: cmapp_process_tag_outAttenuation:
001355: Jan  5 11:23:18.402: cmapp_process_tag_EchoCancelationEnable:
001356: Jan  5 11:23:18.402: cmapp_process_tag_EchoCancelationCoverage:
001357: Jan  5 11:23:18.406: cmapp_process_tag_versid:
001358: Jan  5 11:23:18.406: cmapp_process_tag_versid: versionStamp = 1481221553-ae1f65d3-95eb-4f4a-8dce-23e9f65197a2
001359: Jan  5 11:23:18.406: cmapp_parse_xml: Unknown tag <mlppDomainId>
001360: Jan  5 11:23:18.406: cmapp_parse_xml: Unknown tag <mlppIndicationStatus>
001361: Jan  5 11:23:18.406: cmapp_parse_xml: Unknown tag <preemption>
001362: Jan  5 11:23:18.406: cmapp_parse_xml: Unknown tag <retryVideoCallAsAudio>
001363: Jan  5 11:23:18.406: cmapp_process_tag_networkLocale:
001364: Jan  5 11:23:18.406: cmapp_process_tag_networkLocale: NetworkLocale = United States, index=63
001365: Jan  5 11:23:18.410: cmapp_parse_xml: Unknown tag <callerIDDN>
001366: Jan  5 11:23:18.410: cmapp_parse_xml: Unknown tag <callingPartySelection>
001367: Jan  5 11:23:18.410: cmapp_parse_xml: Unknown tag <dChannelEnable>
001368: Jan  5 11:23:18.410: cmapp_process_tag_encode:
001369: Jan  5 11:23:18.410: cmapp_process_tag_pri_protocol:
001370: Jan  5 11:23:18.410: cmapp_process_tag_pri_protocol: ISDN Switch = 13
001371: Jan  5 11:23:18.410: cmapp_parse_xml: Unknown tag <trunkSelectionOrder>
001372: Jan  5 11:23:18.414: cmapp_parse_xml: Unknown tag <displayIE>
001373: Jan  5 11:23:18.414: cmapp_parse_xml: Unknown tag <helpURL>
001374: Jan  5 11:23:18.414: cmapp_prefix_process_tag_vendor_config:
001375: Jan  5 11:23:18.414: cmapp_process_tag_global_isdn_switch:
001376: Jan  5 11:23:18.414: cmapp_process_tag_global_isdn_switch: ISDN Switch = 13
001377: Jan  5 11:23:18.418: cmapp_process_tag_swback_mode:
001378: Jan  5 11:23:18.418: cmapp_process_tag_swback_mode: Switchback Mode = 2
001379: Jan  5 11:23:18.418: cmapp_process_tag_swback_delay:
001380: Jan  5 11:23:18.418: cmapp_process_tag_swback_delay: Switchback Delay = 10
001381: Jan  5 11:23:18.418: cmapp_process_tag_swback_sched:
001382: Jan  5 11:23:18.418: cmapp_process_tag_swback_sched: SWback  = 12:0
001383: Jan  5 11:23:18.418: cmapp_process_tag_dtmfRelay:
001384: Jan  5 11:23:18.418: cmapp_process_tag_modem_passthrough: - CMAPP_MODEM_PASSTHROUGH_ENABLED
001385: Jan  5 11:23:18.418: cmapp_process_tag_cisco_fax_relay: - CMAPP_CISCO_FAX_RELAY_DISABLED
001386: Jan  5 11:23:18.422: cmapp_process_tag_t38_fax_relay: - CMAPP_T38_FAX_RELAY_DISABLED
001387: Jan  5 11:23:18.422: cmapp_process_tag_rtp_pkg_capability: - CMAPP_CAP_ENABLED
001388: Jan  5 11:23:18.422: cmapp_process_tag_mt_pkg_capability: - CMAPP_CAP_DISABLED
001389: Jan  5 11:23:18.422: cmapp_process_tag_res_pkg_capability: - CMAPP_CAP_DISABLED
001390: Jan  5 11:23:18.422: cmapp_process_tag_pre_pkg_capability: - CMAPP_CAP_ENABLED
001391: Jan  5 11:23:18.422: cmapp_process_tag_sst_pkg_capability: - CMAPP_CAP_ENABLED
001392: Jan  5 11:23:18.422: cmapp_parse_xml: Unknown tag <rtpUnreachableOnOff>
001393: Jan  5 11:23:18.426: cmapp_process_tag_rtpUnreachableTimeout:
001394: Jan  5 11:23:18.426: cmapp_process_tag_rtpUnreachableTimeout: RTP timeout = 1000
001395: Jan  5 11:23:18.426: cmapp_process_tag_rtcpReportInterval: - RTCP REPORT INTERVAL DISABLED
001396: Jan  5 11:23:18.426: cmapp_process_tag_simpleSdpEnable: - CMAPP_SIMP_SDP_ENABLED
001397: Jan  5 11:23:18.426: cmapp_process_tag_versid:
001398: Jan  5 11:23:18.426: cmapp_process_tag_versid: versionStamp = 1481221553-81e7329b-ef64-427e-b3db-0ce6b436ead4
001399: Jan  5 11:23:18.426: cmapp_parse_xml: Unknown tag <loadInformation>
001400: Jan  5 11:23:20.194 EST: %SYS-5-CONFIG_I: Configured from console by console
rtp12-pkinane-SJ(config)#
0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents