You can set the all the phones pasword all in GO from CUCM, if you wish to have same or different password for phones registered to UCM altogether.
Configure "Common Phone Profile" and enter desired password and assign to the phones directly, you can configure multiple profile with different password in each profile and have them assigned to the phones, if you wish to have few phones having different password and few something else then you can perform this way as well.
1) Go to Device >Device Settings> Common Phone Profile.
2) Configure Common Phone profile .
3) Assign this common phone profile to the phone.
3) Reset, it will reset all the phones who all having this profile.
there is parameter for "Local Phone Unlock Password" set it whatever you like to and assign phones at "" . That's it.
Hello there... We planning to run a series of virtual training sessions for groups of ~10 people. Part of the training is the display of videos currently hosted on Vimeo. In testing, having the leader run a video causes the video st...
Hi All, In our environment we have normal and IPPA agents logging in using finesse application. So is there option like report/ table to find out how many agent are in logged in as IPPA. please advise..
Hi,We are receiving report from one of our managers informing all chats are being handled. Can anyone inform on how to troubleshoot this matter? I have attached a screenshot provided by the system, are there specific logs etc that can be revie...
HCS-CC deployment. 11.6 Needing to count, report and throttle port usage by customer/tenant, based on ports purchased/given set of ports assigned. Use case: Small contact center user "Acme", has 50 agents, buys 75 agent licenses/ports. Th...
Cisco IP Phone has started to show this message ' verify your network connection' problem. They have been using this phone for more than 5 years and I'm afraid more phone will get this kind of problem (currently 7 IP Phone has this problem). I've tested t...