The CAD configuration tool can be use to get the MSI installers for the products part of the UCCX desktop suite (CAD, CSD and CDA) prior installing a Linux version of UCCX or upgrading your current UCCX server to a newer version. This process could be handly if your users do not have rights on the PC to install or update applciation and you will need to deploy the installer using an AD policy.
To use the CAD configuration tool please follow the steps bellow:
Burn or mount the UCCX installation media.
Go to the CD drive.
Copy the content of the Installer folder to your computer.
Double click over the ConfigureMsi.exe application.
Enter the number corresponding to the language that will like to use for the CAD application and press enter
Enter the IP address of the UCCX publisher and then press enter
If you have a HA deployment of UCCX enter the IP address of the subscriber otherwise just put none and press enter to continue with the process
The next step will be to select the deployment type. If your UCCX server will be working with a CUCM server press 1 or if it will work with a CME press number 2 and then enter.
Finally we need to enter the number corresponding the licensing type that we will be using in our UCCX server and press enter
After completing the previous step and hit enter the script will generate the three installers for the CAD application in folder from were you ran the ConfigureMSI.exe tool.
If you are running UCCX 9.X the process might not work due to a software defect. You can find more information about the defect in the following link
I can not import new SSL in our webex meetingadmin site, I have import many time but it still the old ssl, which one is coming out of date soon.But when I try to export SSL form SWMS system, it is an new SSL that I have import success.I try restart server...
Hello,I need somebody to help me how to create two reports in cuic 11.6 in the following fields Report 1RouterCallKeyDay (int ,not null)RouterCallKey (int , not null)CallTime (datetime)CLID (varchar (32) , null)QueueTime (int , null...
hi all i have problems with incoming calls from other ip phones to 8851 cisco ip phone with Newrock OM series ip pbx as the main pbx server!!outgoing calls from my 8851 ip phone are ok!!i tried reinstalling firmware but that wasn't helpful!i'm curren...
Hello, I am a final user who´s traying to find out some source of knowledge for some issues I am facing with my new Cisco 8845 3PCC connected to an Issabel PBX/Asterisk. I am coming from a “yeahlink” user experience, so It´s been quite a change in ab...
Hello, I have about 15 remote sites and 2 data centers. The data-centers both have CUBES that connect to the PSTN via provider SIP trunks. Each remote site also has an SRST. I have always assigned MTP via the MRG list for each site ...