When a call is placed from a Computer Telephony Integration (CTI) application, such as WebDialer, the dial tone sounds on the phone that makes the call for 15 seconds before the call goes is placed. This issue occurs on these Cisco CallManager versions:
This happens when the dialed number overlaps with another number. For example, the number 10011 is also a potential match for the dialed number 1001.
This issue is documented in Cisco bug ID CSCsf20938. There is no workaround available for this issue.
In order to resolve this issue, upgrade or install the Service Release (SR) and Engineering Special (ES) software versions listed in the First Fixed-in Version 4.3(0.1), 4.3(0.4), 4.1(3)SR04, 4.2(1)ES30, 4.1(3)ES81, 4.2(3)ES05, 5.1(0.9921.027), 6.0(0.9901.032), 5.0(4.2116.001), 5.1(1.1000.007), 4.1(3)ES89.1, 5.1(1.2000.002.
Hello!In Cisco Webex Meetings the camera shows all my room which is not a good thing, as I share it with my roommates who don't want to be seen. How can I make my video field narrower, so it will show just me? I sit 50 cm from the webcam, which is no...
I have an overhead paging system connected to a VG310 using SCCP. For the most part it works fine however there is one issue we have found. If I call the paging number and hang up the phone while it is still ringing (before the paging system p...
I am looking to see if CUCM Intercom function can be configured as a two way call, in other words, with the called end not muted and also to see if the Intercom answer tone can be disabled. This question was asked in conjunction with a security group that...
I'm on a CUIC bundled with CCX 22.214.171.12400-24. When I run the "custom call variable report" I see duplicate values in the report. Here is an example of the problem in action: As you can notice, some rows are duplicated more times. To be more clear, ...