The agent's phone device is associated with an incorrect VoIP Monitor Server.
The agent's phone device is not associated with a VoIP Monitor Server and an incorrect VoIP Monitor Server is selected as the default VoIP Monitor Server.
Spanning is not set up correctly on the switch.
To resolve this issue, perform these steps:
Select Cisco Desktop Administrator > Locations > your Cisco Customer Response Applications (CRA) Server Logical Call Center (LCC) >Enterprise Data Configuration > VoIP Monitor.
Ensure that either the agent phone device is associated with the correct VoIP Monitor Server or the correct VoIP Monitor Server is selected as the Default VoIP Monitor Server.
Note: Ensure that the correct VoIP Monitor Server is selected as the Default VoIP Monitor Server only if it makes sense for that server to be the default. The majority of your agent phone devices need to be associated with this server.
Make sure the span settings for your switch are correct.
For more information about resolving Cisco CRA and Customer Response Solutions (CRS), refer to these documents:
5508 AP Allow only certain AP's to have dual radio's enabled. I have a device(printer) that operates on 2.4.wifi. I would like to enable the nearest(one) AP to have 2.4 and 5.8 operating. 5508 running 8.5.140 currently. I am trying to move every...
Good Afternoon,One of the departments in our hospital is wanting a Cisco CP-8841 telephone on the second floor of their building. The network switches on that floor are not ready to support VOIP yet but the ones on the 14th floor are. Does any...
Hi EveryoneI have a group of users who are in a hunt group and they want to have a night service enabled. I asked them would they like to have TOD routing enabled and they said no because some days they leave early and some days they leave late and TOD ro...
I want to display the first name last name of the user using the IP phone in ArabicUseful informations:- phone model: sip phone 7841- arabic is already loaded on phone "menu only"- Software and hardware: version CUCME 12.2 on ISR 433...