The agent's phone device is not associated with a VoIP Monitor Server and there is no default VoIP Monitor Server selected.
To resolve this issue, perform these steps:
Select Cisco Desktop Administrator > Locations > your Cisco Customer Response Applications (CRA) Server Logical Call Center (LCC) > Enterprise Data Configuration > VoIP Monitor.
Ensure that either the agent's phone device is associated with the correct VoIP Monitor or the correct VoIP Monitor Server is selected as the default VoIP Monitor.
Note: Ensure that the correct VoIP Monitor Server is selected as the default VoIP Monitor only if it makes sense for that server to be the default. The majority of your agent phone devices need to be associated with that server.
For more information about resolving Cisco CRA and Customer Response Solutions (CRS), refer to these documents:
Hi Community,I have a doubt, how would be the configuration of the Dial peer (pots) to connect to an analog trunk (Fxo) or an E1 link.The type of configuration is a Local Gateway with an Existing Unified CM Environment. (Co resident PSTN-Local Gateway)I s...
Customer does not want to allow CMM traffic going to internet.So that is why I have taken .lic file from cisco but from SFTP I am not able to transfer to root of CMS.And also in CMM I dont see any option to achieve this.Is it mandatory to have connectivit...
HelloFew days ago i created quote and convert into deal. I added end user customer's address which should be " Simple Solutionz LLC" But instead of that i typed Solutions . Can anyone tell how i can change the address in ccw. Because i am trying to change...
Regarding the Cisco Unified Communication Tools, User Data Dump (UDD);When I go to select users via the, "Users associated with this search partition.", filter from the drop down list of options, and then select a valid Search Space Partition th...
I have been using a Cisco ASA 5505 for 10 years with a Cisco phone running any connect SSL VPN client. I switched to a Fortinet Firewall l and once a day the SSL VPN drops and the phone is no longer registered and I have to reconnect manually. Has a...