Incoming calls from a Public Switched Telephone Network (PSTN) to a Cisco IP Phone by way of a Media Gateway Control Protocol (MGCP) or a Skinny gateway could fail with any of these symptoms:
Busy tone: By default, call waiting is enabled on the Cisco IP Phones. Cisco CallManager returns a busy signal to the caller if there are two calls on the same line appearance and no forwarding destination has been configured or if the forwarded destination is unavailable. Check or configure a forwarding destination for the phone in question. Also check the availability of the forwarded destination.
Wrong destination: The call might reach a wrong destination if the called phone has call forwarding configured and this information is not synchronized with the Structured Query Language (SQL) database. If the call is directed to a wrong destination, refer to the Resolution section.
If you have a reorder tone or are without any tone, perform these steps:
Check the registration status of the gateway in the Cisco CallManager.
In the gateway configuration screen of Cisco CallManager, verify that the number of significant digits mentioned correspond to the number of digits in your dialing plan.
If the called Cisco IP Phone is in a partition, then the most common reason for receiving reorder (fast busy) is that the calling party does not have the rights to call the called party. In the case of calls from the PSTN, the Calling Search Space (CSS) that the gateway belongs to must include the partition of the called party. For more information on CSSs and partitions, refer to Understanding and Using Partitions and Calling Search Spaces with Cisco CallManager.
If the incoming circuit is an analog Foreign Exchange Office (FXO) port, then ensure the port direction is set to either inbound or both ways.
Also try resetting the gateway and the Cisco IP Phone.
Hello All - We have a CTI Route Point (1111) pointed towards UC and there we created a Call handler. When the caller opts for any option, that will transfer the call to number 2222 which we created as Hunt Pilot number in CUCM. When the agents ...
Hi If there are offices in India with Cisco Telepresence codecs registered to the US UCM Cluster and planning to use them to dial into Cisco WebEx Conferences , which pass over the network to Expressways in US and then into Cisco Cloud. Do these comply wi...
Hello all, I am facing a weird issue where my Cisco Unity is not turning the MWI on for any user that has received a new voicemail. I am not talkting about the MWI on the phone but the value itself on the Cisco Unity platform. I have alreadIP Telepho...
Hi all; I have a CME with IP phones configured and something weir happened, here the explanation:When the receptionist phone gets an external call and receptionist wants to fwd the call to the per...
We have an XML menu for overhead announcements (paging) and I would like to have a menu where there's an option to dial a paging number and dial an emergency number. But, if the emergency number is pressed, it redirects to another menu/screen where it exp...