Jabber Windows cannot control phone device from client
User can authenticate to Jabber Windows, and IM/Presence functions correctly, but the phone control does not. When going into Options > Phone Accounts, all you see is a spinning wheel.
Jabber for Windows 9.0.1
Cisco Unified Communications Manager 8.5.1
Cisco Unified Presence 8.6.3
Jabber for Windows will authenticate with the CUPS server, then attempt to locate the authenticated users CCMCIP profile to download the list of associated devices that user is allowed to control. If this service is not activated, or if this user has no devices associated with them, than phone control will not work.
Verify the CCMCIP service is in a "Running" state on the CUCM server (Cisco Unified Serviceability > Tools > Control Center - Network Services > CM Services > Cisco CallManager Cisco IP Phone Service)
Verify the device in question is associated with the end-user (Cisco Unified CM Administration > User Management > End User > username > Device Information > Device Association)
Verify the line appearance in question is associated with the end-user and device (Cisco Unified CM Administration > Device > Phone > dn_in_question > line appearance > User Associated with Line)
Verify the CCMCIP Profile in CUPS is configured and associated with the end-user and is configured for the correct CCMCIP Host (Cisco Unified Presence Administration > Application > Cisco Unified Personal Communicator > CCMCIP Profile > profile > Primary CCMCIP Host & Users in Profile)
Verify the Audio Profile in CUPS is configured and associated with the end-user (Cisco Unified Presence Administration > Application > Cisco Unified Personal Communicator > Audio Profile > profile > Users in Profile)
Follow the documentation for CUCM, CUPS, and Jabber for Windows to verify all the steps have been performed.
Hi,I have just upgraded an 11.5 deployment of CUCM, IM & P and Unity Connection servers from 11.5 to 12.5.The operating system used by the virtual machines changes from Red Hat Linux to CentOS 7.I have tried to change the guest operating system on the...
If a remote destination is calling in to another desk phone on the same cluster (PBX) the caller ID from the attached directory number. If you call to another cluster it will just show "WIRELESS CALLER". I am wondering if there is any solution so all clus...
Hello...I have an issue with sound/voice outgoing and incoming call.Use 2 ISPs, the first ISP uses E1, and the other uses SIP. When trying to make an outgoing call, at first there's no problem with sound and hear what they said.But, in the middle of ...
I have an existing number of 3200 that I want to forward to a System Call Handler number of 5847. I can dial 5847 and all the prompts work with no issues. But when I add the 5847 number to the call forward of 3200, all I get the voicemail message. &n...
Hi Experts, I am a bit confused to understand the queue time and the ring time in the CCX. I have configured the queue overflow as shown below. Please correct me if I am wrong here; Every select resource step has the same timeout...