You cannot upgrade directly from one Edition of Cisco Unified Attendant Console to another: a full re-installation and a new license are required.
If you upgrade the Cisco Unified Attendant Console server you also need to upgrade the Cisco Unified Attendant Console. If you do not, differences between the databases may cause inconsistent system performance.
IIS must be installed and activated before installing Cisco Unified Attendant Console.
If you have a Microsoft Windows network that uses DHCP, you must allocate a static IP address to the Cisco Unified Attendant Console server machine.
Access to the Cisco Unified Attendant Console server is not supported at any time via Remote Desktop (RDP), Terminal Services (TS) or any other session-based application. These applications can cause TAPI/TSP and Wave Driver instability. Only local or VNC connection is supported.
Once a system is fully licensed you cannot apply temporary licenses for additional seats. You must wait for the order process to be fulfilled by Cisco before you can add additional seats to an already licensed server.
To license the evaluation software, do the following:-
Enter your User Name and Password and then click Log In.
In the navigation bar, click ACTIVATE PURCHASED SOFTWARE.
Select your Reseller, Customer and Customer Site.
Note:- If your reseller, customer or site are not available. choose the options to add them.
Enter the Registration Code and then click Submit.
Note:- To find your Registration Code, log into Cisco Unified Attendant Console Web Admin and choose Help > Licensing.
Enter at least one License Activation Code and then click Submit.
In the Licence Request Confirmation page, optionally enter an additional e-mail address and click Submit. If you want to change the License Activation Code you entered in Step 6 before proceeding,
Click Revise License Request. A registration (.RGF) file is e-mailed to you, and license request confirmation information is displayed in the web page.
Open the email and save the registration file to a location that can be browsed by the Cisco Unified Attendant Console server.
Log into Cisco Unified Attendant Console Web Admin and choose Help > Licensing.
In the License Management page, select Registration File.
Click Browse and then open the Registration File.
Click Submit to complete the registration.
Stop and then restart the services.
CUDAC/CUBAC/CUEAC seat license
The licensing appears to follow a concurrent connection model. Which suggests, that you only need one seat license in your scenario.
You must order a Cisco Unified Business Attendant Console license for each concurrent operator login. A maximum of six concurrent operator client logins are supported per Cisco Unified Business Attendant Console server. Example: If you need six attendant consoles logged into the server at the same time, you should order six licenses.
What's the best way to upgrade the ESXi system running on a BE6/7K? Am I just shutting down the VMs, doing a standard upgrade from the cli of the ESXi install to 6.7 (currently n 6.5) or is there a Cisco specific image I need to upgrade to? I'...
Hi,We have CUCM v12.5. I know that by default CUCM is not involved in a call after the call has been set up. My question: is there a way to configure media paths (RTP audio) the same as signaling paths, I mean the media exchange doesn't occur directly bet...
I have an question regarding the ringing when calling a Hunt Group. I have a Escalation Hunt Group with 4 members, configured for Top Down cycling. The Hunt Group works correctly, cycling to all members, with the members of the line group receiving c...
Hi people,I am having an issue upgrading CUCM cluster for a customer from version 22.214.171.12400-26 to version 126.96.36.19900-22. Also tried 12.5.1SU3 failed that one too. Cluster is made of 1 Publisher and 1 subscriber, following IM/P and UnityC.Here is the ...