This is a working config copied off a branch router (2851 running 12.4(24)T2 to avoid MGCP bugs in our environment and the CUCM is 7.1(2)). This is pretty raw but should compliment the rest of the guides in this forum for a working example.
! ccm-manager mgcp no ccm-manager fax protocol cisco ccm-manager music-on-hold ccm-manager config server 10.10.10.10<--- Your CUCM Address ccm-manager config ! mgcp mgcp call-agent 10.10.10.10 2427 service-type mgcp version 0.1 <--- Your CUCM Address mgcp dtmf-relay voip codec all mode out-of-band mgcp modem passthrough voip mode nse mgcp package-capability rtp-package mgcp package-capability sst-package mgcp package-capability pre-package mgcp default-package mt-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp fax t38 nsf 000000 no mgcp fax-relay sg3-to-g3 mgcp rtp payload-type g726r16 static mgcp bind control source-interface GigabitEthernet0/0.100<--- Your Interface mgcp bind media source-interface GigabitEthernet0/0.100<--- Your Interface ! mgcp profile default !
Dear Team,God Day! kindly note that i configure my extension and its showing pingable from the call manager as shown in the attachment. but it's still showing unknown and i can't register the phone. please fin...
Ask Me Anything Forum
Cisco Unified Communications Manager CUCM Installation & Upgrade
Cisco Unified Communications Manager (Unified CM) provides reliable, secure, scalable, and manageable call control and session management. Transform your workspace...
When I run the Cisco Finesse Agent Not Ready reason Code Summary report, the text values of the reasons do not display. Is there a translation table for the codes to text? Is this something my IT/Phone Support person is supposed to customize? The codes al...