Missing Features in CUCME 4.3??

[damionlld]

For some reason I am missing a lot of features when using the Voice side of my router. There are more commands missing than what I have listed. I listed a couple below  CUCME 4.3 ((C3745-ADVENTERPRISEK9-M), Version 12.4(25)

1. I have a  7906 and I dont see the option for the firmware load.  I used the load 7905 with the 7906 firmware but now the 7906 doesn't work correctly.

How can I see the options to load different firmware?

<loadInformation20000  model="IP Phone 7905">SCCP11.8-3-3S</loadInformation20000>

RT_3745(config-telephony)#load ?

  12SP       Select the firmware load file for 12SP+ and 30VIP phones

  7902       Select the firmware load file for 7902

  7905       Select the firmware load file for 7905

  7910       Select the firmware load file for Telecaster 7910 phones

  7912       Select the firmware load file for 7912

  7914       Select the firmware load file for sidecar 7914

  7920       Select the firmware load file for 7920

  7935       Select the firmware load file for 7935 Conference Station

  7936       Select the firmware load file for 7936

  7960-7940  Select the firmware load file for Telecaster 7960 & 7940 phones

  7970       Select the firmware load file for 7970

  7971       Select the firmware load file for 7971

  ATA        Select the firmware load file for ATA

2. I dont see the option for auto-reg-ephone

RT_3745(config-telephony)#auto?

auto

RT_3745(config-telephony)#auto

3. I also get this error when trying to create cnf-files.  This happened after I upgraded my router to 12.4(25).  I can't delete them either.

%Error deleting flash:SEPDEFAULT.cnf (No such file or directory)

%Error deleting flash:XMLDefault.cnf.xml (No such file or directory)

RT_3745#cd system:

RT_3745#delete /force XMLDefault.cnf.xml

%Error deleting system:XMLDefault.cnf.xml (Invalid argument)

RT_3745#

RT_3745(config-telephony)#no create cn

RT_3745(config-telephony)#no create cnf-files

CNF files deleted

RT_3745(config-telephony)#cre

RT_3745(config-telephony)#create cn

RT_3745(config-telephony)#create cnf-files

Creating CNF files

%Error deleting flash:SEPDEFAULT.cnf (No such file or directory)

%Error deleting flash:XMLDefault.cnf.xml (No such file or directory)

[Greeshma Bernad]

Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions

For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro). For your specific issue, you can go to IP Telephony forum