NOTE: Even though we have g711ulaw configured under voice register pool for jabber client, in the INVITE message from Jabber client we always see g729 codec.
Config: ! voice register pool 1 registration-timer max 720 min 660 id mac 30F7.C583.E8D8 session-transport tcp type CiscoMobile-iOS number 1 dn 1 dtmf-relay sip-notify Codec g711ulaw username 6810 password cisco !
++++CME sends 488 Not Acceptable Media in response, since under voice register pool we had only g711 configured. SIP_UNACCEPTABLE_MEDIA_ERR Mar 2 08:30:29.458: //15204/37EECCC3BF4A/SIP/Error/sipSPIContinueNewMsgInvite: Unacceptable media indicated for INVITE
Sent: SIP/2.0 488 Not Acceptable Media Via: SIP/2.0/TCP 192.168.131.197:63438;branch=z9hG4bK3451ff19 From: "118216801" <sip:email@example.com>;tag=000000000000005800f06918-2783a723 To: <sip:firstname.lastname@example.org>;tag=46749EC-1C3A Date: Mon, 02 Mar 2015 08:30:29 GMT Call-ID: email@example.com CSeq: 101 INVITE Allow-Events: telephone-event Warning: 304 192.168.131.253 "Media Type(s) Unavailable" Reason: Q.850;cause=65 Server: Cisco-SIPGateway/IOS-12.x Content-Length: 0
++++After Disabling the Low bandwidth option on Jabber client. Config: ! voice register pool 1 registration-timer max 720 min 660 id mac 30F7.C583.E8D8 session-transport tcp type CiscoMobile-iOS number 1 dn 1 dtmf-relay sip-notify voice class codec 1 username 6810 password cisco ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 3 g729r8 !
+++We can see now, Jabber client sending now all the configured codecs in the INVITE message to CME for outbound call.
NOTE: Make sure we do "create profile" under "voice register global" and restart the jabber application, every time a change is made under "voice register pool"
====Fix==== -Disable low bandwidth option on Jabber on iPhone IOS -We can keep low bandwidth option on jabber, but then g729 codec as to be there under voice register pool or voice-class codec applied on the voice register pool. So all the calls from/to Jabber client will be on g729 codec.
Hi all,I need to do a Place Call step to multiple mobile phone simultaneously.Which is the best approach?I have my numbers stored in a String and i was thinking to split them in an array as suggested here https://community.cisco.com/t5/contact-center/spli...
Hi,Seeing the error constantly for every call in an application. No issues reported with the call and interactions, but this is just an error that is kicking my OCD.This first line loads.....08:16:49.796,,custom,CallStart,Loading App Properties from [C:\C...
Hello, I am using a cisco 8865. It is a new phone, just 4 weeks old. when i'm on the phone, it works perfectly with the built-in speaker.however, nothing happens when the handset is picked up. neither the call is answered nor can i hear or...
Hello I have configured some SIP TRUNKs and works well. My question is if there is a way where if my wan failure the calls could re route through PSTN? I was reading AAR but it says that this options is used only when Location CAC isn't sufficen...
Hello everyone, I know the obvious answer involves CSS and partitions BUT on a VG if I have several lines that have to stay in the same CSS and partition is there a way to block calls between these extensions but still allowing inbound/ou...