Note: This video is very similar to the previous video in the series; however, the main point here is understanding the format of the SDL process (node, application, process, process instance) and seeing the SdlSig-O/SdlSig-I messages.
First we find the dialed digits using dd="<number dialed>"
Then we can find the Digit Analysis DmPidRes and get the PID for the called device, the first CI, and the CDCC.
Searching on the first CI we can get the SIPCdpc for party 1 and the second CI.
After we know the SipCdpc for party 1 we can search on it and quickly get the SIP Call-id.
Searching on the SIP Call-id for the first call leg we can get the SIP messages for that leg.
Going back to the search of CI one we can find the outbound CcSetupReq on node two and we can find the inbound CcSetupReq on node three.
Scrolling down in the trace file for node three we can find the SIP messages for the second call leg.
More information from the call can be gathered by going back through the search outputs of the CI's, SIPCdpc's, SIPStationCdfc's, and CDCC's.
Hi. Looking at the documentation regarding DRS Restore for CUCM 11.5.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/AdmiDisaster Recovery Disaster Recovery System,DRS,Backup,RestoreSystem,DRS,Backup,Restoren/cucm_b_admin...
Hello,We are planning to update the 'UC Service profile' on the CUCM End user page for a large group of Users using BAT >> Update users >> Custom File in CUCM 11.5.1 SU5. however wanted to understand how can we trigger this config change ...
Hi everyone If I connect 2 quad cams to Webex RoomKit Plus or Webex RoomKit Pro codec, can I expect functional Speaker Tracker feature?I know that I can set up the inputs to camera and that I should use Ethernet switch to have control on both cameras...
Hi All,there is a quite anoying thing, leading to a bunch of tickets in our site.Szenario:New Agents are automatically thrown in the Default Team. -> okIf they log into Finesse these agents are showing up in all other already existing Teams. -> nok&...