I've created a tool to allow the automation of some tasks regarding phone backgrounds:
Push background images to phones belonging to a particular user
You can create service users for Front Desk phones, corridors and meeting rooms phone
Allow the background to be pushed according to the phone model
For the 9951, push the 640x480x24 background
For the 7965, push the 320x212x16background
Create a configuration file with the details of where your backgrounds can be reached, which user associated phones you want to push the background, etc...
You can also use command line switches to change any particular background push.
Here's a sample pushed background to a 7965:
Configured models (not extensively tested!):
Please note: the IP phones have an internal flash - the tool pushes the background irrespective if the background already exists on the phone. This might shorten the life of your flash if you do it very often!
You can find the documentation in my website (no ads!) and the link to github where you can get it:
Dear Team,We have a call center setup where the callers will be calling a support number and choose options (like 1 for sales, 2 for technical support, etc.). The callers will be connected to the agents. And the agent may do a blind transfer call to the i...
Hello, I know I have done this before, but am having trouble finding where and how to disable the "press any digit to be connected" when answering a Single Number Reach call. On CUCM 11.5.1SU6. Have a situation where it needs to just answ...
Hi All, We have a CMS cluster and one of the devices developed a h/w fault and was RMA'd. The replacement came with 2.1 s/w and was upgraded to 2.5.3 and a backup was restored. The device was sitting in our office during our COVID lockdow...