I have an issue where the QOS on the 3560 is not working or reporting correctly.
The setup is
1) Remote site 2811 with Metro Ethernet Handoff. (Access lists contain standard voice, voice signaling and video ports and ip addresses and these access lists are identical on both devices) Metro Ethernet is provided to us via a standard CAT6 from the Metro E controlled switch.
! class-map match-all priority-data match access-group 103 class-map match-all voice-video-traffic match access-group 102 ! ! policy-map QOS-POLICY class voice-video-traffic priority percent 50 set dscp ef class priority-data bandwidth percent 20 set dscp af31 class class-default fair-queue random-detect
interface FastEthernet0/1 description Connection to Metro Ethernet
ip address 10.254.254.2 255.255.255.252 service-policy output QOS-POLICY
hey,where can I read how many user can participant in a IM screen sharing session?i saw that in this topic of cisco: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/10_5/rn/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5/JABW_BK_J...
Dears I am planning for 10 contact center agents with around 90 users in total , i was planing for CME 12.5 and UCCX 12.5 but when i went to the compatibility matrix they are not compatible, On the other hand when i went to CME guide it mentioned the...