After a difficult deployment in South Korea, I want to share with you the complete Dial Plan and Dial Peer configuration for Cisco CUBE and SIP trunking.
As some of you might have experienced, trying to find the complete dial plan for South Korea is practically impossible if you don't speak Korean (which I don't, just for the record).
South Korea uses a non standard dial plan with different length numbers, area codes and public services; preceeding zeros an local dialing within it's different provinces. In my case, I implemented this for an office in Seoul
In order to implement this dial plan, it was necessary to investigate all the possible dial patterns and transform the dialing to a fully E164 compliant dialing (Service Provider requirement).
I used a Cisco 4331 router with Cisco IOS XE Software, Version 03.16.05.S. UCk9 and CUBE licenses,
I'm also attaching the Excel file with the different patterns for CUCM and Cisco IOS Router.
Hope this is useful for anybody and a big thanks to my coworker Tae who helped me with the translation of the Excel
I have a Cisco IP 8851 that is not Ringing. Even when you hit volume up or down to set ring volume you do not hear a audible ring like on other phones. All CUCM 11.5 settings look right such as “device ring”. Any ideas?
Global leader in voice termination backed by 22 yeas of experience delivering the highest quality and competitive rates.
hi guys, i was wondering if someone help to come with a filter for ldap. my client is a college. all the students' username are numbers (probably their student ID). employees got their username based on their first/lastname. a...
Hi, I have Cisco ISR4331 with Version (Version 03.16.04b.S )((X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b) . I am trying to register sip phones on this and have succeeded. I used bind address command so that sip phones do get registered...