cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

single-passing for analog phones connected to the VG224

1182
Views
0
Helpful
4
Comments

My network topo is: Analog phones connect to the vg224 to register to CCM over MGCP.

No problems between ip phones or bewteen analog phones, but between ip phones and analog phones. I can't heard any voice from IP phone side. I tried sccp before, the result is same.

How can I selove the problem?

Comments
Enthusiast

Hello Dear,

your working setup is good and fine but as i tested i here in my lab with vg202 and vg204 it is working both protocal and call is fine between ip and analog.

this one way calling issue is due to routing error.

you have missed some routing due to that one way voice is shwoing.

please cross check the whole netwokd and then it will work smarty.

Amit

Beginner

Thank you!

That's right just like your said.

Hall of Fame Master

Post question in dicussions, not documents.

Beginner

Sorry, I just noticed that.