The following are some frequently asked questions on SIP Phone failover.
Q1. How does Call Manager know that the SIP phone becomes un-reachable?
A: Cisco Unified Communications Manager knows that the phone is unreachable when cucm tries to send some message to phone and it gets tcp connection failure, or cucm does not receive re-REGISTER message.
Q2. How does the sip phone know that CallManager becomes un-reachable and starts to failover?
A: SIP Phone knows that CUCM is unreachable when phone tries to send some message to cucm and get tcp connection failure and start failover process. Q3. Is geometric timers applicable to Cisco SIP IP phones?
A:Yes, geometric timers are applicable to Cisco SIP IP phones.
Hi Guys,Recently I've been digging into some call records to generate some reports. But, on callingPartyNumber from CDR records, some of the values are "Unknown". Is this some kind of bug or it's a missing info received by the CM? My CM is 11.5.Thank...
Running CISCO WEBEX Room 70 Dual G2 with Ce9.8.x firmware. Problem is dual display input. The Computer input one and the display is mirrored. Is there a setting to extend display between the two monitors on the 70??? Want to show a vi...
Dears,I want to renew the CME router warranty, as if i know if it is BE6K server we have to do the renewal for the UCS hardware and separate renewal for the CUCM Licenses, however i don't know about CME Please guide me for the CME licenses. Tha...