I have a customer that is running CME 12 and all of his phones located at the office where the CME resides work just fine. We just connected a satellite office to it using a ASA to ASA Site to Site VPN Tunnel. The remote site is working great except none of the phones at that site are allowed to register with CME. All of the phones have their proper IPs from DHCP with their required Option 150 and proper Gateway.
In fact when I run a debug ccsip all I see all of the phones trying to register with CME. But they are all being rejected.
I have both networks defined to CME as Trusted. All of the voice register pools are fine because if I bring the phones over to the main office they register and work just fine.
voice service voip ip address trusted list ipv4 10.100.200.0 255.255.255.0 ipv4 10.10.200.0 255.255.255.0
I am allowing all protocols and ports both ways across the tunnel with the ACLs.
I have no-proxy-arp route-lookup on my NAT statements on both ASA's.
I have tried it with both
policy-map global_policy class inspection_default
and no inspect sip
Still getting this message when the phones at the remote site try and register...
We've had a couple of instances where users accidentally dial something like "9118883540". The call isn't recognized as a 911 call by CUCM, so it just routes it to our SIP Provider (Centurylink). Centurylink treats it like a 911 call. CER doesn't get trig...
Hi, We are working on an integration with Cisco UCCX (184.108.40.20601-34).We need to get skill aggregated data in 15 minute intervals.The skill data that is needed per interval is: Call volume (handled + abandoned), Handled calls, Average...
Need some Opinions on this. I have a Device on site that is not always manned but it's 'important'. The customer has the following requests: Device rings DN 4444If No Answer and it's during Business hours, send it on to DNs 4000, 4001, 40...
Hi there, We are running a Zoom webinar through three Cisco SX80's across all offices to join our All-Hands meetings. Ideally, we want to share content from one location and have our remote participants share on the left screen and our content share ...
hello everyone, My management requested from to generate report for calls informations like average time , waiting duration and more info per user.When I go to System>traffic the generated report contain minimum info and the value is 0 Where ...