The Tool for Auto-Registered Phone Support (TAPS) loads a preconfigured phone setting on a phone. The TAPS works in conjunction with the Bulk Administration Tool (BAT) to minimize installer effort during phone placement. After the BAT is used to bulk add phones with dummy MAC addresses to Cisco Unified Communications Manager, you can plug the phones into the network.
The administrator or the phones’ user can then dial a TAPS directory number, get prompted by an IVR, enter their extension and that causes the phone to download its configuration. At the same time, the phone gets updated in the Unified CM database with the correct MAC address of the phone.
To be able to deploy TAPS internationally localized versions of the TAPS IVR prompts are included in Communications Manager locale installers.
This application note will describe how to install TAPS with localized prompts.
As you may be aware the following critical vulnerability has been released for CCX.https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-uccx-rce-GMSC6RKN Does anyone know what port Java Remote Management listens on on the CC...
Hello team,do you have a procedure to add advanced users as network admin with specific accounts from AD ? We are actually using a 1 local admin account and not the best practice. The aim is to enable them to log with their advanced account with AD advanc...
My customer has UCCE 11.6 4000 Agents reference design, he needs to add a new groups of agents who are assigned to a new domain different than the current one,My Question,Is it feasible for UCCE to have Two different separated domains, 1000 agents in Doma...