The extension of the requested user is not valid because the user does not have a primary extension assigned in Cisco CallManager or the ccndir.ini file is missing information.
To resolve this issue, perform these steps:
On the Cisco CallManager User Information web page, verify that the user has an entry in the AutoAttendant Dialing field, that the user record has an associated phone and that the Primary Extension radio button is selected.
On the Cisco Customer Response Applications (CRA) server, verify that the ccndir.ini file contains the correct userbase and profilebase information, as shown in this example:
USERBASE "ou=Users, o=cisco.com"
PROFILEBASE "ou=profiles, ou=CCN, o=cisco.com"
For more information on resolving Cisco CRA or Customer Response Solution (CRS), refer to these documents:
Hello, recently, if we have the *6 enabled at Site level, when an endpoint enters the meeting with "Mute on entry" enabled or if we mute all during the meeting the SIP devices (VC endpoints) are also muted (OK) but if the organizer unmute the VC device it...
Hello all, I know the way to implement a Survey with UCCX 11 or later using the Post Call Treatment feature and using DB, SMTP, WebService, etc.. connections (Premium licenses). However we have a customer with Enhanced licenses and these features are...
Hi All, Since the network limitation we have to control our Room Kit Plus by serial port.To connect the RMC3 to the codec we use Aten UC232A adapter and setup the serial by the followings:- 115200/8/1- no auth required The Crestron engineer...
Hello,I have a question about updating Unified Com applications (CUCM, CUC, IMP) to version 12.5.In the precheck, it is indicated as follows:If the previous two checks pass, the test checks if the server is using the ext3 filesystem and marks the test as“...
Hi,here is the scenario that i want to configure it but not sure where and how to do it not sure even if it possible or not. if a call is coming to person1 and he did not receive it should transfer it to group if group not receive it should transfer ...