After the IP address of the Customer Response Solutions (CRS) system is changed, one cannot set or receive Enterprise Data parameters. The Enterprise Server Data Subsystem remains in OUT_OF_SERVICE status. Other than this minor issue, everything else seem to work fine.
To resolve this issue, perform these steps:
Open a cmd prompt.
Run IPUpdate from C:\Program Files\cisco\desktop_config\util, and update the IP address.
If the procedure fails to update the IP address, perform these steps:
Go to C:\Program Files\Spanlink, and copy the entire folder to a safe location. Delete the Spanlink folder.
Go to Registry, and copy the HKEY_LOCAL_MACHINE\SOFTWARE\Spanlink hive to a safe location. Delete the Spanlink hive.
Hello,We have few of the Cisco 8831 Conference Phones, we don't use the CUCM to set up the phones. We set up the phones through the CLI commands, the issue that we are having is the Speed dials are not showing up on the screen. If I press the arrow button...
Hi, Is there more detail than the CCMP 11.6 admin guide on backing up CCMP and restoring if needed? The admin guide has 3 paragraphs, none talk about restoring except with a "technician." Backups only discuss using the default window 2 t...
Hi everybody, I have a doubt about layouts in CMS, actually i try to change the layout use for a Space and i change the default layout option in the Web Console of CMS (i annex the image) but the meetig still work with the automatic layou...
Hello,We are using UCM 10.6 and i was asked if i could generate a report for a specific department (i have collected the DNs associated w/ the department) of all outbound calls from the first of the year to now. I know i can generate a report of all...