The one-way audio issue is caused by the default transfer methods used by different software versions of Cisco CallManager Express and Cisco Unity Express (CUE).
CUE version 2.3.1 uses the semi-attendant method as the default transfer operation. Prior to version 2.3, CUE used the blind transferorbye-also method. Cisco CallManager Express versions earlier than 3.4 use the blind (bye-also) transfer method.
Cisco CallManager Express version 4.0 and later use the semi-attendant transfer method. Therefore, CUE 2.3.1 is not backwards compatible to any Cisco CallManager release earlier than 3.4, unless the transfer method is changed back to blind (bye-also).
The issue is documented in Cisco bug ID CSCse31911.
To resolve this issue, perform one of these procedures:
Change the Cisco IOS version on the Cisco CallManager Express to 12.4.4XC or later, so the transfer method is the same on the Cisco CallManager Express and CUE 2.3.1 systems.
Change the transfer method on the CUE to blind bye-also to allow interworking between earlier versions of Cisco CallManager Express and CUE 2.3.1.
Change the CUE configuration under the ccn subsystem sip,and issue the transfer-mode blind bye-also command.
Hello,I'm trying to manage some certificates on our PLM. I'm able to login to the web UI just fine but there's no way to manage certs from in there (from what I can tell). Our version is 11.5 and there is only one account listed under Administrator Accoun...
Upgraded a customer to the latest version of cucm 12.5 SU4. Before upgrade, the 8851 had a custom background image, but the expansion module had a blank background, which made it easier to read the characters on the screen. Since the upgrade t...
Hi, Someone have made a report definition were we can get every skillgroup set for agents ? Like the Agent_Attributes but for skill group. I know I can get it from SQL but I want it to be available to managers. Thank you
We are trying to find reference documentation to help us know the full capabilities of the Cisco 8851 and 8841 etc range of models. In particular the "Line Key X" section under voice -> Phone section.We'd like to know the full range of commands availab...
Hello all, I need your help please. I have a cucm 12.5 integrated with cisco gateway ISR on H.323 , in this gateway i have one card E1 . My cstomer want to implement this scenario with one E1 , unscrewed in channels 1 -Chann...