During the live event you will get hints and solutions for troubleshooting video call flows that traverse the video communications server (VCS) and Cisco Unified Communication Manager call control agents. The seminar will cover how to debug various endpoint and protocol combinations, extract useful logs, and determine common interoperability issues. Sniffer and Cisco Unified Communication Manager trace snapshots will be demonstrated to compare working and nonworking cases. After the session, the attendees should be equipped with sufficient knowledge to identify issues and possibly correct the problems themselves.
Mahesh Anjan is a product manager in the Collaboration and Communications Group at Cisco. He is an expert in deployment in deployment of video communication services, enterprise video solutions, and other telepresence products as well as unified communications. He has vast experience in VCS and Cisco Unified Communication Manager interoperability deployments. Anjan has worked at Cisco since 2005. He holds a bachelor’s degree in electronics and communication engineering from the University of Bangalore, a master’s degree in computer engineering from Wichita State University, and an MBA from the University of North Carolina at Chapel Hill. He holds service provider HCS specialist certification..
Hi, I want to use OPUS at 510kbps for most of my calls between sites. So it makes sense to set the system default for interregion calls, and intraregion as well for that matter, to 510Kbps. However the maximum setting is only 256K. Am I missing somet...
I have a MediaSense V11.5.1 server that I have open to the Internet for the Search and Play feature. I am using a one-to-one NAT and have TCP/8440 and TCP/8446 open. Users access the server using a FQDN and can login and scroll/search the medi...
I have configured a predictive outbound campaign in UCCX 12, however I just realized that agents can't watch the customer information before accept the direct preview call in Finesse. Is that the expected behavior?
Installing CUE OVA on ISR4K KVM, following the guide I configured following:
interface VirtualPortGroup1ip unnumbered GigabitEthernet0/0/0.120!
interface GigabitEthernet0/0/0.120encapsulation dot1Q 120ip address 172.20.16.1 255.255.255.0!