c) Important: COP ciscouccx.106x.cucm11x-compatible.14.cop.sgn. is only needed for 10.6 Base
If you are running 10.6.1SU1, COP file is not needed, the documentation is wrong. You will get the following error from the logs:
sd_cancelInstall.sh|Pre-upgrade cancel/clean-up initiated sd_cancelInstall.sh|Canceling active side processes sd_cancelInstall.sh|Canceling active side processes done sd_cancelInstall.sh|Canceling inactive side processes sd_cancelInstall.sh|Skipping IDS shared memory clean up since this is a COP sd_cancelInstall.sh|Canceling inactive side processes done
locale_install.sh: Successful untarring of /common/download//ciscouccx.106x.cucm11x-compatible.14.cop Validate the ES compatibility Install Failed...The ES is not compatible with the Service Update Installed in the system locale_install.sh: ERROR: Copstart script of /common/download//ciscouccx.106x.cucm11x-compatible.14.cop failed
Hello, I am trying to decide which is better to use, I have a cisco 2921 router that has a PVDM3-32, My IOS is 15.7M and I wanted to know which would be better the PVDM3 or ISM-SRE-300-K9 module? I also have CME 12.0. This will also be using Uni...
Hi team, as title say,cme-srst: Registered, Not In Use. each time we reboot the router this is preventing the phones can register again when the router reboot, when we re issue the command no max-ephones and max-ephones everything works again and the stat...
im setting up a MGCP with FXS and FXO , im confused about the attendant DN , with FXO when i set the attendant DN number , it means this is the extension on cucm any incoming calls on that FXO will ring , but with FXS what does attendant DN do? what...