c) Important: COP ciscouccx.106x.cucm11x-compatible.14.cop.sgn. is only needed for 10.6 Base
If you are running 10.6.1SU1, COP file is not needed, the documentation is wrong. You will get the following error from the logs:
sd_cancelInstall.sh|Pre-upgrade cancel/clean-up initiated sd_cancelInstall.sh|Canceling active side processes sd_cancelInstall.sh|Canceling active side processes done sd_cancelInstall.sh|Canceling inactive side processes sd_cancelInstall.sh|Skipping IDS shared memory clean up since this is a COP sd_cancelInstall.sh|Canceling inactive side processes done
locale_install.sh: Successful untarring of /common/download//ciscouccx.106x.cucm11x-compatible.14.cop Validate the ES compatibility Install Failed...The ES is not compatible with the Service Update Installed in the system locale_install.sh: ERROR: Copstart script of /common/download//ciscouccx.106x.cucm11x-compatible.14.cop failed
These things rarely stump me, but neither an older Plantronics CS70 VT or brand new Sennheiser SD Office (SD BS) will receive audio on my new CP-8845.Setup - 4. Accessories - 1 Analog Headset [checked] with headset symbol.Details show... Name: Analog head...
I have CME with one SIP trunk registered with ITSP, the trunk is authenticated with user and password.- outgoing call works fine but not for incoming call for sip phones, debug showerror SIP/2.0 404 Not Found (the number does not exist is the prompt ...
Hi All, I will be taking in a SIP trunk from my Telephone company and converting it to our internal shortel PBX via PRI. I'm trying to go thru the configuration of what this will look like on my Cisco 4331 ISR gateway. Both the SIP and PRI will termi...