This issue occurs when a Cisco Unity server has more than one network interface card (NIC) installed.
Complete these steps in order to resolve this issue:
Verify if the Cisco Unity server is properly registered with the Cisco CallManager and has the correct IP address.
If the registered IP address is something like 169.254.x.x, the chances are that the Cisco Unity server has two NICs, but only one of them is connected and the other is enabled, but not connected to the network.
Disable the second NIC and restart the Cisco Unity service.
Cisco Unity should now be registered with the correct IP address and you should be able to record greetings and leave voicemail messages.
For information on troubleshooting Unity related problems, refer to:
Hello.I have Cisco 7960G IP Phone that registered in CUCM 10.5.2 .I define some of directory numbers with urgent priority eg. 2248. when someone tries to dial a number like 22485631 in phones except 7960, if he first types the numbers in on-hook state and...
I have a VWIC2-2MFT-T1/E1 card in a 3825 router. After a power outage it is no longer connecting. When the router is powered back up both ports on the T1 card have the Alarm light on even without any cable plugged in. Is this a configura...
Hi All What are the explanation for SIP servers in Cisco terminology? If the all the server types are integrated on CUCM, what are feature or settings it would be? Proxy Server:Redirect Server: Registrar:Location Server:I have some understa...
We have just implemented UCCX 12.0 for staging and testing.Write after the installation we could not access the <IP Address>/appadmin page. followed the installation guide and it does not show any steps required after the fresh install. a...