The default behavior for an FXS port (a port that you connect an analog phone or fax to) on a cisco router is to act as a gateway port that is configured with h.323 in CallManager Express.
We can make the FXS port act just like a SCCP controlled phone like a VG224 port or phone connected to an analog telephony adapter. This way you can control the phone in CallManager express and use CME to manage hunting and other features.
Cisco has a configuration guide for STCAPP at This Link
Below is a sample working configuration: sccp local FastEthernet0/0.15 sccp ccm 10.15.0.1 identifier 10 sccp ccm 10.10.0.1 identifier 12 sccp ! sccp ccm group 1 associate ccm 10 priority 1 associate ccm 12 priority 2 associate ccm 30 priority 3 switchback method graceful stcapp ccm-group 1 stcapp ! dial-peer voice 3 pots service stcapp port 0/1/0 ! voice-port 0/1/0 caller-id enable
I'm trying to use the "Current Wait Duration" field within the "CSQ IPCC Express" report object for the Get Reporting Statistic step and can't get it workingwe would like to play a message every 2 mins , give the caller an option to press 1 to leave ...
Does anyone here know if there is a way to edit the default message that plays when you forward a voicemail to another user? It says "enter the extension and press pound." We need it to say "enter the 10-digit extension and press pound".
Hi everybody! I took the 200-120 exam in august of 2016 and it expired in august of 2019.Since all the career paths are now different I wanted to know which tests can help me recertify this 200-120.I am planning to take the ENCOR 350-401 in orde...
Hello Webex Admin Community, We are trying to register a Webex Room 70 single G2 to Webex cloud but after successful activation, there is an error on the device saying that the Call protocol is set to default Spark but not registered to any protolcol...