cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

vic2-4FXO-PSTN Automatic offline

31
Views
0
Helpful
0
Comments

I have 1 2851 router deployment of CME, vic2-4FXO Connection PSTN.

computer use ipsec-VPN Login 2851 router Registered for use CIPC ephone, ephone internal communication is OK!,But Dial PSTN out is Busy tone

pstn Call ephone ,Can Display call information, But after on automatic hang up.

I need help

---------

voice-port 0/0/3

input gain 2

no echo-cancel enable

timeouts initial 30

timeouts call-disconnect 120

timeouts ringing 360

timeouts wait-release 3

connection plar 7580

caller-id enable

!

ephone  10

device-security-mode none

mac-address F0DE.F1E4.77F7

ephone-template 1

codec g729r8

type CIPC

button  1:1

voice-port 0/0/3
input gain 2
no echo-cancel enable
timeouts initial 30
timeouts call-disconnect 120
timeouts ringing 360
timeouts wait-release 3
connection plar 7580
caller-id enable

!
ephone  10
device-security-mode none
mac-address F0DE.F1E4.77F7
ephone-template 1
codec g729r8
type CIPC
button  1:1

R2851-US#sh voice call su

PORT           CODEC     VAD VTSP STATE            VPM STATE

============== ========= === ==================== ======================

0/0/0                                            *shutdown*

0/0/1                                            *shutdown*

0/0/2                                            *shutdown*

0/0/3         g711ulaw   n  S_SETUP_REQ_PROC      FXOLS_WAIT_DIAL_TONE    

50/0/2  .1       -          -  -                     EFXS_ONHOOK             

50/0/2  .2       -          -  -                     EFXS_ONHOOK             

50/0/1  .1       g711ulaw   n  S_PROCEEDING          EFXS_OFFHOOK   R2851-US#sh voice call su
PORT           CODEC     VAD VTSP STATE            VPM STATE
============== ========= === ==================== ======================
0/0/0                                            *shutdown*
0/0/1                                            *shutdown*
0/0/2                                            *shutdown*
0/0/3         g711ulaw   n  S_SETUP_REQ_PROC      FXOLS_WAIT_DIAL_TONE    
50/0/2  .1       -          -  -                     EFXS_ONHOOK             
50/0/2  .2       -          -  -                     EFXS_ONHOOK             
50/0/1  .1       g711ulaw   n  S_PROCEEDING          EFXS_OFFHOOK   

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards