When CCME is accessed through the HTTP GUI, sometimes the T1/E1 controllers on the IOS voice gateway...
When CCME is accessed through the HTTP GUI, sometimes the T1/E1 controllers on the IOS voice gateway become inaccessible, calls do not complete through the gateway, and the gateway reloads unexpectedly
The graphical user interface (GUI) was designed for Cisco CallManager Express (CCME) and Cisco Unity Express (CUE) to ease the administration of the CCME and CUE IOS features. The GUI provides a user-friendly interface to the standard Cisco IOS command line interface (CLI). The GUI translates and sends the Cisco IOS CLI commands to the gateway through an HTTP communication path.
Cisco has determined that some commands can overwrite sections of the gateway memory, and corrupt the data on the voice gateway. These commands include system-wide configuration parameters and commands that reset all IP phones. Therefore, the use of the HTTP GUI for CCME can lead to the corruption and instability of the IOS voice gateway, when these commands are issued. This can also occur due to the usage of the GUI for CUE when interworking with CCME. Depending on the current IOS configuration and the specific command set, failures can range from minor to critical.
When using CME GUI to add 7902 phone initially, the CME GUI does not recognize the phone. This might result in phones not registering properly.
To prevent the occurrence of this problem, Cisco recommends that you use the CLI to configure and maintain the CCME VoIP gateway. To disable access to CCME through the HTTP GUI interface, issue the no ip http server global configuration command.
CSCeg03707 is fixed in 12.3(08)T06, 12.3(07)T06, 12.3(11)XL, 12.3(11)T02, and 12.3(11.09)T.
You can also overcome this problem by upgrading the IOS to any of the above mentioned versions by visiting: Cisco IOS Software
HiI have BE7000 and CMS1000I will like to know if it is possible to access and manage the ESXI interface of those system with active directory account Please advise and share documentation if it is possible
Hello Experts, just want to know how do i get EWT details from task routing API? which API i have to call ? any configuration on ICM side ? anything i have to do while submitting the task submission API request to social miner . Currently i am g...
Running VCS Exp - C version 15.6.4Logged into the server and had a blank web page and could not get to any settings .. Performed a restart and after about 25 minutes tried to login and got login expired invalid cookies. I am a...
Can anyone point me in the right direction for the required cable to connect a Quad Cam Line in to a SX80 line out.The install guide picture makes it look like its a fully balanced stereo out to the quad cam, but i can't say I have ever seen a stereo bala...