In this situation, Cisco Unity is installed on a Windows 2000 server, and the Cisco Unity version 4.x required service pack three is installed. After the system prep utility displays the message that service pack three is required and the button to install service pack three is selected, the system is checked for hard drive space, the installation freezes.
The clue in this case is where the failure occurred, in the hard drive space. After control is passed over to the service pack installation routine, the service pack installation routing found insufficient space and stopped. This is also seen when attempting to install service pack three alone, without the Cisco Unity upgrade script running.
For a workaround to the problem, clear some hard drive space, and run the upgrade utility again.
Hi All, We have a setup with following in the infrastructure. CUCM Cluster : 18.104.22.16800-40 [ one publisher and one subscriber] IM and P : 11.5 one pub and one sub. Single pair of Expressway E and C version 12.5.9 &nb...
I am using CUCM with PSTN/E1.I am able to receive calls (Inbound) but unable to make calls (Outbound), what can I do to resolve it?When I receive calls:May 11 18:47:44.559 GMT: ISDN Se0/1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x69D3Bearer Capability ...
hi dear friends,i want just to give some information and test result about jabber integration with imagicle solution, this is my test result in date 5/13/2021jabber version 14.0.0 on both PC and android, has some bug with imagicle gadgets integration...