While Cisco CallManager 4.x is upgraded, during the Microsoft Windows 2000 OS upgrade, the "Potential critical Error encountered running cpSATARAID2.exe /s /f" error message appears with a value of "2"
When the OS upgrade completes, the OS upgrade tries to install the Adaptec Embedded Serial ATA HostRAID Driver for Windows 2000/Server 2003 with cpSATARAID2.exe /s /f. This component provides support for the Adaptec Embedded Serial ATA HostRAID Adapter.
/s means install without user interaction
/f means allow a downgrade or reinstall if already up to date. It is used with /s.
The reason for the failure is due to a stop services failure. But, the reboot helps to force the service to stop and restart, which clears the services problem so that the installation can still complete. In other words, this is not a critical error, but is an informational message.
Hi expertsmay I ask how to force rtp go through cube, our voip environment isgenesys — cube — cucm All established call is point to point rtp transmition, cube is only forwarding signaling , is there any ways to make rtp can through cube?
I have an axis camera connected via third party sip to CUCM, when calling a newer sip phone whenever a DTMF is pressed the call disconnects. Works fine with older model phones, any ideas? if it helps I see this in wireshark before disconnect, BYE rea...
We have 2 servers running VMWare vSphere 6 Embedded Essentials, it was purchased as a part of our CUCM server from Cisco. We are looking to change the way we manage these 2 servers. Are we able to join these servers to our vCenter standard, and apply a st...
Hello, my apology for not posting a technical question. I'm a Avaya tech who wants to learn Cisco CUCM by building a mini CUCM home lab. I'm seeing a lot CME lab kits on Ebay however, I believe CUCM and CME are completely different from each o...