You'll want to make sure you've scoped out the training requirements for subscribers early in the process, before the project team becomes heavily involved in design and implementation. This way, you'll ensure that sufficient time is available to develop and present the training.
Bear in mind that different audiences receive content at different rates from different channels. You can't expect 100% of the intended audience to attend a single training session, for example. You might consider assessing the program schedule at this point and identifying content delivery timeframes that will provide a communications flow that moves targetted audiences to appropriate positions on the commitment/adoption curve:
1. “Awareness” – vision, goals, benefits
2. “Understanding” – what’s changing, who is affected, actions required
3. “Acceptance” – training details, new roles and requirements, formal policies
4. “Adoption” – realized benefits, Support and Maintenance, future roadmap.
This is on an older cluster, 10.6, but is effecting all agents, when launching finesse in any modern browser the reports (gadgets) never load. Within IE an error is reported to contact an administrator. Opening dev tools I can see that there is a 404...
Hello,If I want to connect by SIP Trunk my CUCM 12.5 with an Audicodes Mediant 800B router, do I need a SIP Trunk license in the CUCM? The Audiocodes router would function as an SBC (Session Border Controller) to receive incoming and outgoing calls from M...
Hello,We seem to have got into a bit of a mess with respect to licenses and actual usage. The license report tells use everything is good, but is overstating our actual usage with respect to users. The problem is that CUCM thinks that <user> should ...
When I opened Cisco Jabber today it asked for a reset, when i cancelled the reset it completely logged me out and when I logged back in it completely reset my settings. My question is why was it asking for a reset and why did it reset all of my settings.
I am in the process of replacing an old VCS Control appliance. Is it possible to backup the old VCS Control and restore the backup on an Expressway Edge? The only reference I found was in documentation is : "Backups can only be restored to ...