Once you move into Day 2 support mode, continue to monitor your subscriber community. Their satisfaction is key to the long term success of the project.
Complete any lingering issues associated with the cutover.
Meet with users on a regular basis. Conduct periodic satisfaction surveys. Stay in contact with the powers users and the special users. Check with the key business units you listed earlier and verify the Cisco Unity solution is performing as expected.
Document any problems that are identified. Resolve the problems as quickly as possible and report your results. Do not allow negativity to build.
In Control Hub, I have a single user that I have configured Monitoring with a few Monitored Lines and few Call Parking Extensions under User > Calling > Advanced > Monitoring. This user has three 8851 devices. Now, all t...
Similar to personal rooms a lobby for scheduled meetings that have yet to be opened by the host or co-host would also be helpful for external participants. This way they are not required to keep trying, again and again, to join a meeting before the ...
HI, I need to pull data from multiple remote CME , like DN, ph mac address, username. I could pull that from web interface (Configure>Phones)in good format BUT when I compared with results from cli command show ephone , I didn not find any matches betw...
i have a GainMaker that went bad and would like to replace it's GainMaker from Scientific Atlanta 1G 35-90V ~50-60HZ but can't find it if it's discontinued with wat can i replace if my cables are with 60v to broadcast tv