The yellow light on the front panel of the server is indicative of a potential hardware failure due to a faulty part or unsecure connection.
When you remove the cover of the server system, you see that the corresponding yellow/amber light is next to a dual in-line memory module (DIMM).
To validate if this issue is due to a bad connection, faulty RAM, or failed memory port, you need to power down the system and swap places for the memory modules. Upon moving the modules and powering on the server, if the warning light does not return, the issue is possibly due to an unsecure connection of the DIMM on the motherboard of the server.
If the issue still persists, then the problem could be because of a faulty DIMM. Contact the reseller or open a Service Request using the Service Request Tool.
hi dear friends,i want just to give some information and test result about jabber integration with imagicle solution, this is my test result in date 5/13/2021jabber version 14.0.0 on both PC and android, has some bug with imagicle gadgets integration...
Hello, i'm using a Cisco CUCM 11.5 version and i did create a Phone Service named Speedy to use an external directory.After that i went under the phone to subrscribe that Phone Service Speedy but it's not on the list of Phone Services. Someone c...
Hi,my presence/IM server shows wrong current UTC Time. (20:42 instead of 15:42)NTP is enabled and Publisher has correct UTC Time and timezone set. I did the following workaround: I set a "wrong" timezone (Etc/GMT+5) on the presence server.Now at leas...