Traffic priority

[VenkataRamana29848]

Dear All

We are using  Data, Audio, and Video  traffic In our cisco 2911 routers network.

WAN link is connected with serial interfaces of Routers

.

Our requirement is when all three types of traffics are available at input, only one type of traffic to be allowed through WAN link, and remaining other traffics to be blocked totally as per the priority list  given below.  

1st priority is Data

2nd priority is Audio

3rd priority is Video

If Data, Voice , and  Video traffic is available at input based  on priority only Data to be passed through WAN link and Voice and Video to be blocked.

If only Voice and Video is available at input then only audio to be passed through, and video to be blocked.

Kindly requesting all, please support me on this regard.

 Thanks and regards,

Ramana

[Mohammed al Baqari]

Hi,

You can not achieve this on IOS. You need a programmed intelligent
director to do this (I don't know one that can).

You can use LLQ for data to pause voice/video when data is present (but not
100%).

*** please remember to rate useful posts