02-15-2006 10:42 AM - edited 03-13-2019 11:30 PM
I just received the 4.0(3) upgrade CDs from Cisco. I received only 3 CDs in the kit. Is it possible to take those 3 CDs and do a new hardware install and upgrade from 3.5(2) to 4.0(3). The documentation indicates that I can perform this type of new hardware upgrade. I was just a little concerned that I only had 3 CDs as opposed to the 7 CDs that came with 3.5(2). Also is there a way to request the current IPT OS 2000.4.1 or 2000.4.2. All I have are the 2000.2.4 CDs that were shipped with CRS 3.5(2). I suppose I can use what I have and upgrade to 2000.2.7 and then 2000.4.2.
Joe
02-15-2006 11:18 AM
Joe,
Its surprising you got 2000.2.4 cd's with CRS 3.5.(2). I am in the middle of a CRS impl., and the version is 3.5(2) and the OS discs are 2000.2.7. You can download an upgrade file to upgrade from 2000.4.x from CCO.
I just got the disks for 4.0(3) and it has only 3 disks. Remember IPCC install requires only disk 1 and disk 2, unless you install multiple language, the other disks are not needed.
Check this guide for your upgrade from 3.x to 4.x. I am currently reading through it to understand the upgrade procedure, which seems fairly long.
Now, you do have a step where it asks for CRS 4.x license. I dont see a PAK number with this SASU kit, so I believe i have to use the old PAk from 3.x and contact licensing @cisco.com to get the new license.
I will keep you posted how this goes!
HTH
Sankar
PS: please remember to rate replies
02-16-2006 01:30 AM
There has been a New Product Hold on all upgrades of IPCC Express 3.X to 4.0(X).
VTG News - CCBU Announcement
Upgrades from any CRS 3.x to CRS 4.0(1), 4.0(2), and 4.0(3)
February 8, 2006
dev.cisco.com/voice/news/ccbu020806.shtml
02-17-2006 12:03 PM
Pralex,
I see that there is a hold on this, but the link you specified is an internal cisco link. Can you paste the contents ?
Thanks
02-21-2006 10:16 PM
Cisco Field Alert
Effective Date: February 3, 2006
Affected Products: Cisco IPCC Express and IP IVR
Affected Releases: Upgrades from any CRS 3.x to CRS 4.0(1), 4.0(2), and 4.0(3)
Issue: While most customers have successfully upgraded to CRS 4.0(x), issues have been found in some upgrades from IPCC Express or IP IVR 3.x to IPCC Express or IP IVR 4.0(x). This issue does NOT affect new installations for 4.0 or add-ons to existing 4.0 installations.
Impact to orders in progress: Effective immediately NEW PRODUCT HOLD is being placed on all upgrade product IDs, both for purchase and via SASU, for the affected products. This issue does NOT affect new installations for 4.0 or add-ons to existing 4.0 installations.
Resolution: Resolved in the CRS 4.0(4) release, with a target release date of mid-April 2006.
Recommendations: If your IPCC Express Edition or IP IVR 3.X customer has already ordered or is planning to order an upgrade to 4.0, please inform them that we recommend they wait for the FCS of the 4.0.4 release.
Please address any questions to: ipcc-express-pm@cisco.com
02-21-2006 04:25 PM
Same situation here, new MCS-7825-H1 or HP DL320 G3 needs newer Hardware detection CD and OS CDs.
Also no KEY PAK shipped with the SASU PUT Tool media.
Opened TAC-LICENSE case only to get the run around asking for Cisco Sales Order.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide