I'm trying to setup a CCX HAoWAN deployment but I'm findind some problems trying to add the second node to the cluster.
The servers are installed in different sites and with different subnets. When I try to add the second server to the cluster (in the Replication Wizard step) I get this error:
Add to Cluster is failed because of ClusterException Timeout for Node Controller 1 : AddToCluster
The only packets denied by the firewall are multicast packets sent from the second node (right now I’m not sure about the destination address, 22.214.171.124 or 126.96.36.199) and I suppose these packets are sent from the Jini lookup service used by the MCVD. I haven’t found any documentation about this requirement (multicast allowed through the WAN). This is the only reason I have found that could explain the error.
Any idea on how to solve this problem? Have you ever faced this problem (maybe it's not because of the multicast traffic blocked in the fw...)?
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...