cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1162
Views
0
Helpful
3
Replies

Cisco Jabber not able to login with Finesse

Dear All,

 

We are running UCCE 10.5.x and configured Jabber clients and registration is failed. Because there is no Primary /Secondary DNS entry on CUCM servers.

 Added local host entry with CUCM IP & Hostname ( without FQDN Name ) then cisco Jabber registration is done.

 

 But not able to login cisco Finesse ( The device associated with that extension or dial number is invalid).

 

End-user configured and  assigned roles

Jabber device Added into PG application user

Given working PT, CSS and all the CTI parameters are enabled

 

 

Able to login cisco CIPC and hard phone

 

Please check the attached jgw log and advise.

 

Extension: 7567

Device name: CSFIMRAN

UCCE 10.5.1

CUCM 10.5.1

Cisco Jabber 11.9.3

 

Ram.S

 

 

Regards,
Ram.S
3 Replies 3

Konstantin Vaksin
Cisco Employee
Cisco Employee

This is error you have

21:22:50:190 PG1A-jgw1 Trace: AddCallObserver address validation failed - Address Name: 7567, error code: 152.

 

You will need to check pim1 logs

Igor Filatov
Level 1
Level 1

Hi.

Do you have CUCM Common Device Configuration with IPv4 only for the Jabber?

As I remember it is there: Device -> Device Settings -> Common Device Configuration

Hi Igor,

 

Yes, Common Device Configuration in place but no luck.

 

the same configuration is done by a few customers and working fine. still, I worried because of DNS entry not configured in CUCM servers.

 

please advise.

 

 

 

Regards,
Ram.S
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: