06-25-2020 01:52 PM
Hello,
We are on UCCE 11.0 and are currently leveraging the mobile agent feature for some of our agents. These agents are entering the cell number in the "Dial Number" field. Most of the mobile agents are not experiencing any issues. A couple of them are experiencing an issue with inbound ICM calls. They see a call appear in Finesse but their cell phone never rings. This configuration was working for them yesterday. I have logged in as them with my cell phone number in the "Dial Number" field and it worked without any issue.
Any ideas?
06-25-2020 06:46 PM
There are many items, but the first thing I'd check is, are you using call by call or nailed connection.
In other words, is the system able to call these users ever to get logged in? Or is it that they log in, and sometimes they "miss" a call that should be delivered to them. I'd try nailed connection vs. call by call as a start if it is the latter.
06-26-2020 02:44 AM
We had a similar issue where an agent is reserved but no call, traditionally this can suggest BW issues with RTP however in our case it wasn't this
Our issue related to CVP failing to connect to CUCM, if there are any network issues, CVP will try to contact CUCM in the sip server grp in CVP if it fails it will block further attempts for 3mins I think after it tries again. The solution seems to add more cucm serves in the sip server grp.
We had a tac case open
06-26-2020 06:18 AM
We are typically using call by call. In my tests with call by call and nailed connection this morning, only every other call is being appearing in Finesse and then routing to my cell phone. I'm testing in a skill group that I am the only member of.
06-26-2020 12:50 PM
So basic question, are you sure the calls get to you if you were in the office, eliminating mobile agent from the equation?
If they do, if you do a few test using nailed connection mobile agent, is it still intermittent?
What happens if you make outbound calls over the nailed connection out, do they always work?
06-26-2020 02:44 AM
We have observed same issue in our environment as well. Mostly its related with mobile network provider. If you have enabled RNA timeout in OAMP for (MA) extension range, try increasing it to 30-45 secs.
06-26-2020 07:15 AM
Were the mobile service providers able to give any confirmation or resolution in your case?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide