cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
700
Views
0
Helpful
4
Replies

Contact Center CAD IP Address

Is there any way I can get currently logged in CAD's IP address from UCCX application or select from DB?

Get User Info step doesn't have IP field.

Running UCCX 8.5.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advisor

Re: Contact Center CAD IP Address

If you are sending XML payloads to CAD, you are probably using IPC, correct?

The best way you can handle this then is have the CAD login action "register" the login with your IPC server.

Here's a video I made, showing how CAD can talk to an IPC server (written in ruby).

http://www.youtube.com/watch?v=88E-z0ShlFE

Here is a forum thread where I gave away the code:

https://supportforums.cisco.com/message/3041806#3041806


Anthony Holloway

View solution in original post

4 REPLIES 4
Highlighted
Enthusiast

Contact Center CAD IP Address

Are you trying use this information in a script?

Please rate helpful posts by clicking the Chuck Taylor logo!
Highlighted

Contact Center CAD IP Address

Hi andrew, I want to use IP from third party scripts, to send Remote XML Messages to CAD. One solution which I found is to log when Agent startup, followes additional HTTP action wich informs and writes to DB.

But if anywhere in DB or by application is possible to get this value by Agent ID would be better.

Highlighted
VIP Advisor

Re: Contact Center CAD IP Address

If you are sending XML payloads to CAD, you are probably using IPC, correct?

The best way you can handle this then is have the CAD login action "register" the login with your IPC server.

Here's a video I made, showing how CAD can talk to an IPC server (written in ruby).

http://www.youtube.com/watch?v=88E-z0ShlFE

Here is a forum thread where I gave away the code:

https://supportforums.cisco.com/message/3041806#3041806


Anthony Holloway

View solution in original post

Highlighted

Contact Center CAD IP Address

Ok, thanks anthony, I thinks that's best solution to add custom action to CAD Startup, maybe with IPC server, or just HTTP action.

CreatePlease to create content